5052/5083/6061 Precision Milled Aluminum Plate

Model NO.: 5052/5083/6061
Alloy: Alloy
Trademark: Chalco Aluminum
Transport Package: Export Standard Wooden Pallet
Specification: ISO9001: 2008, SGS, RoHS
Origin: Henan China
HS Code: 7606129000
Model NO.: 5052/5083/6061
Alloy: Alloy
Trademark: Chalco Aluminum
Transport Package: Export Standard Wooden Pallet
Specification: ISO9001: 2008, SGS, RoHS
Origin: Henan China
HS Code: 7606129000
5052 5083 6061 Precision Milled Aluminum Plate
Chalco 5083 5052 6061 precision milled aluminum plate is vertical cast, stress-relieved, machined plate providing sound dimensional stability with minimal or no distortion even after extensive machining operations.
Chalco 5083 5052 6061 precision milled aluminum plates have a precision machined surface for superior flatness, very good thickness tolerance, and are protected with PVC plastic on both sides.
Alloy: 5083 5052 6061
Temper: F, H111, H112, T6, T651,T451
Thickness: 6mm up to 300mm
Length: 500mm up to 6000mm

Characteristics of Chalco 5083 5052 6061 precision milled aluminum plate:
1. High strength
2. Pre-homogenized and stress relieved
3. Dimensionaly stable throughout
4. Extremely low porosity
5. Low weight-to-volume
 
Chemical Composition of 5083 5052 6061 precision milled aluminum plate
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Others Aluminum
Each Total
EN AW-5052 0.25 0.40 0.10 0.10 2.2--2.8 0.15--0.35 - 0.10 - 0.05 0.15 Remainder
EN AW-5083 0.40 0.40 0.10 0.40-1.0 4.0-4.9 0.05-0.25 - 0.25 0.15 0.05 0.15 Remainder
EN AW-6061 0.4-0.8 0.70 0.15-0.40 0.15 0.8-1.2 0.04-0.35 - 0.25 0.15 0.05 0.15 Remainder
 
Physical Property of  5083 5052 6061 precision milled aluminum plate
Alloy EN AW 5052
Temper Specified thickness mm Rm
MPa		 Rp0.2
MPa		 Elongation min. % Bend radiusa Hardness
HBWa
over Up to Min. Max. Min. Max. A50mm A 180° 90°  
Fa ≥2.5 80.0 165                
O/H111 6.0 12.5 165 215 65   19     2.0t 46
12.5 80.0 165 215 65     18     46
H112 ≥6.0 12.5 190   80   7       55
12.5 40.0 170   70     10     47
40.0 80.0 170   70     14     47
Alloy EN AW 5083
Fa ≥2.5 250 250                
250 350 245                
O/H111 6.3 12.5 270 345 115   16     2.5t 75
12.5 50.0 270 345 115     15     75
50.0 80.0 270 345 115     14     73
80.0 120.0 260   110     12     70
120.0 200.0 255   105     12     68
200.0 250.0 250   95     10     69
250.0 300.0 245   90     9     69
H112 ≥6.0 12.5 275   125   12       75
12.5 40.0 275   125    

Waist Tape Measure

FEATURE

The waist tape measure starts from 4.5cm instead of 0, because when the tape wraps around your waist in a circle, the case part occupies 4.5cm of the circumference.


About Materials and Colors

The tape measure is made of ABS case, PVC coated fiberglass. All the materials are eco-friendly, which pass ROHS and EN-71 tests. The lead content is less than 5ppm.

Case colors can be customized according to pantone code.

Custom logo is available.

Tapeline standard background color can be in white, black, pink, green or other colors.
Scales in white, black or other colors.
We can make full color or 1-2 colors personalized design printing too.


About Sizes

The case is handy, 9cm length, 6cm width.
The standard length is 1.5M/60inch and 2M/80inch.
Tape width is 13mm


About Measurements

1.The first one is cm and inch on one side
2.second one is cm on both sides,
3.the 3rd one is cm on one side, inch on back side.


About Usage

1. Pull the tape out gently,
2. Lock the tab in slot
3. Press the button to make the tape to fit your body
4. And then you will get your waist measurement. It is so convenient! Good tester for your weight-loss training.

5. After using the tape measure, press the button again for retraction.






Metric Black Body Fat Caliper,Body Tape Measure Fat Skinfold Caliper,Hand Measuring Body Fat, Waist Measuring Tape, Waist Tape Measure, Waist Circumference Tape Measure

Wintape Measuring Tape Company , https://www.wintapetape.com