Effectively solve the current bank ATM machines exposed to adequate space, prevent potential dangers such as looting in the self-help area, and draw up an independent operation space for cardholders.
guiding ideology
The design of smart shelters used in the project strictly implements the “Notice on Further Strengthening the Construction of Self-service Banking Security Facilities in Banking Institutions†of Hubei Provincial Office and Hubei Banking Regulatory Commission (Egongtong [2012] No. 38 Annex 1) and Wuhan The spirit of the "Notice on Developing the Protection Cabinet of Bank Self-Service Equipment" issued by the Municipal Bureau of the Communist Party of China (Wugong Jingbao [2012] No. 17). According to the "Measures for the Implementation of Construction Licenses for Financial Institutions and Security Facilities of Financial Institutions" (* Departmental Order No. 86), Regulations on Risk Levels and Protection Levels of Banking Establishments (GA38-2004), and Regulations, Standards, and Norms on the Provisions of the Ministry of Banks, Self-service Equipment, Safeguarding Measures for Self-service Banking (GA745-2008), etc. The provisions of the document combine the characteristics of banking financial institutions and actual needs as a basis and criteria for customization.
overall framework
The purpose of the intelligent protection cabin and door frame used 304 # stainless steel plate (thickness should be greater than or equal to 1.5mm), one-time stretch molding, column and beam should contain U-shaped groove. The protective cabin shall be made of materials that are resistant to violence and vandalism, and isolate the customer operating area before each self-service equipment into a relatively independent space. The cabin material should adopt not less than 5mm laminated glass or not less than 5mm tempered glass and the thickness of 0.1mm Explosion-proof membranes, etc., and each glass joint should be supported by metal (or wall) force members to ensure that each piece of laminated glass is firm and reliable.
The overall dimensions of the intelligent protection bay adopted by the project are 2400mm in height, 1200mm in width and 1100mm in depth; the height of the net tunnel is 1930mm in height and 675mm in width. ATM machine intelligent protection compartment (full wraparound) glass partition bottom can not be installed on the bottom, and not less than 20cm above the ground, the top edge is not less than 200cm; self-service equipment protection compartment (half-enclosed) glass partition from the ground at 60-90cm Between the top edge is not less than 200cm; at the same time in the 140cm to 180cm should be taken translucent shielding measures to ensure that customers use bank self-service equipment, outside the protection of personnel can not see the operating process. The built-in equipment of the protective cabin shall be installed in a concealed manner, and shall be properly protected against rust, water, electricity, and earthquakes to effectively protect the personal safety of the customer. The direction of opening the door to the protection bay should not affect the normal pedestrian behavior of surrounding pedestrians.
The project adopts an ATM network-based intelligent controller independently developed by a manufacturer, highly integrated multi-channel digital signal input, multi-channel relay digital signal output, and integrated input and output with related audio and video, and can be used for ATM ATM protection doors. Remote intelligent controller for control and management. The intelligent guard cabin shall be equipped with an automatic door lock, and the installation shall be firm. When a customer uses the bank self-service equipment, it may be internally locked or automatically locked and opened to other customers at the same time. The automatic door lock can be remotely controlled. The intelligent protection cabin does not obstruct the surveillance line of sight of the video surveillance system, ensuring that the remote monitoring center can basically see the activities of the customer in the protection bay. Outside personnel of the protection bay can see the internal operator activities, but they cannot see the contents of the keyboard operation.
The smart bay is equipped with LED display in a prominent position to show the working state of the bay. The LED display device should be able to be controlled remotely. The LED screens externally displayed on the bank's self-service equipment access control system can be adjusted at any time according to the business needs of the supervisory department or banking financial institutions. Warnings should be provided for abnormal bank self-service equipment.
Hardware deployment
The intelligent protection bay used in the project has a standard size and the unit size is 1100×1000×2300 (units mm). According to the different installation environment of the self-service equipment and the different banks, the security cabin can be customized. According to different cabin structures, it can be divided into three basic structural types: "One", "L", and "U".
"U" type: Except the ATM machine, this side is the outside of the wall, and the remaining three sides are the protection capsules. The "U" type cabin is mostly used in a relatively open environment and is a basic cabin type of a Siamese protective cabin.
Type "L": Except for ATM machine, this side is outside the wall, and one side adjacent to ATM is also a wall. The guard cabin is partitioned by two surfaces. It is mostly used when the side of the ATM machine is close to the wall.
"One" type: It is mostly used for small-sized off-the-shelf indoor single ATM machines.
The outdoor protective cabin is equipped with a light box at the top and provides lighting for the cabin at night. The cabin is also equipped with protective cabin controllers, network modules, temperature-controlled fans and other equipment.
guiding ideology
The design of smart shelters used in the project strictly implements the “Notice on Further Strengthening the Construction of Self-service Banking Security Facilities in Banking Institutions†of Hubei Provincial Office and Hubei Banking Regulatory Commission (Egongtong [2012] No. 38 Annex 1) and Wuhan The spirit of the "Notice on Developing the Protection Cabinet of Bank Self-Service Equipment" issued by the Municipal Bureau of the Communist Party of China (Wugong Jingbao [2012] No. 17). According to the "Measures for the Implementation of Construction Licenses for Financial Institutions and Security Facilities of Financial Institutions" (* Departmental Order No. 86), Regulations on Risk Levels and Protection Levels of Banking Establishments (GA38-2004), and Regulations, Standards, and Norms on the Provisions of the Ministry of Banks, Self-service Equipment, Safeguarding Measures for Self-service Banking (GA745-2008), etc. The provisions of the document combine the characteristics of banking financial institutions and actual needs as a basis and criteria for customization.
overall framework
The purpose of the intelligent protection cabin and door frame used 304 # stainless steel plate (thickness should be greater than or equal to 1.5mm), one-time stretch molding, column and beam should contain U-shaped groove. The protective cabin shall be made of materials that are resistant to violence and vandalism, and isolate the customer operating area before each self-service equipment into a relatively independent space. The cabin material should adopt not less than 5mm laminated glass or not less than 5mm tempered glass and the thickness of 0.1mm Explosion-proof membranes, etc., and each glass joint should be supported by metal (or wall) force members to ensure that each piece of laminated glass is firm and reliable.
The overall dimensions of the intelligent protection bay adopted by the project are 2400mm in height, 1200mm in width and 1100mm in depth; the height of the net tunnel is 1930mm in height and 675mm in width. ATM machine intelligent protection compartment (full wraparound) glass partition bottom can not be installed on the bottom, and not less than 20cm above the ground, the top edge is not less than 200cm; self-service equipment protection compartment (half-enclosed) glass partition from the ground at 60-90cm Between the top edge is not less than 200cm; at the same time in the 140cm to 180cm should be taken translucent shielding measures to ensure that customers use bank self-service equipment, outside the protection of personnel can not see the operating process. The built-in equipment of the protective cabin shall be installed in a concealed manner, and shall be properly protected against rust, water, electricity, and earthquakes to effectively protect the personal safety of the customer. The direction of opening the door to the protection bay should not affect the normal pedestrian behavior of surrounding pedestrians.
The project adopts an ATM network-based intelligent controller independently developed by a manufacturer, highly integrated multi-channel digital signal input, multi-channel relay digital signal output, and integrated input and output with related audio and video, and can be used for ATM ATM protection doors. Remote intelligent controller for control and management. The intelligent guard cabin shall be equipped with an automatic door lock, and the installation shall be firm. When a customer uses the bank self-service equipment, it may be internally locked or automatically locked and opened to other customers at the same time. The automatic door lock can be remotely controlled. The intelligent protection cabin does not obstruct the surveillance line of sight of the video surveillance system, ensuring that the remote monitoring center can basically see the activities of the customer in the protection bay. Outside personnel of the protection bay can see the internal operator activities, but they cannot see the contents of the keyboard operation.
The smart bay is equipped with LED display in a prominent position to show the working state of the bay. The LED display device should be able to be controlled remotely. The LED screens externally displayed on the bank's self-service equipment access control system can be adjusted at any time according to the business needs of the supervisory department or banking financial institutions. Warnings should be provided for abnormal bank self-service equipment.
Hardware deployment
The intelligent protection bay used in the project has a standard size and the unit size is 1100×1000×2300 (units mm). According to the different installation environment of the self-service equipment and the different banks, the security cabin can be customized. According to different cabin structures, it can be divided into three basic structural types: "One", "L", and "U".
"U" type: Except the ATM machine, this side is the outside of the wall, and the remaining three sides are the protection capsules. The "U" type cabin is mostly used in a relatively open environment and is a basic cabin type of a Siamese protective cabin.
Type "L": Except for ATM machine, this side is outside the wall, and one side adjacent to ATM is also a wall. The guard cabin is partitioned by two surfaces. It is mostly used when the side of the ATM machine is close to the wall.
"One" type: It is mostly used for small-sized off-the-shelf indoor single ATM machines.
The outdoor protective cabin is equipped with a light box at the top and provides lighting for the cabin at night. The cabin is also equipped with protective cabin controllers, network modules, temperature-controlled fans and other equipment.
Henan liangjin tools co.,Ltd founded 1999, is a modern chemical measuring tool manufacturer integrating scientific research, development, production and export sales.
The company has self-supporting import and export rights, and more than 90% of its products are exported to Italy, More than 60 countries and regions, including Spain, the Netherlands, Poland, Russia, Nigeria, India, Iran, South Africa, Japan, Brazil, ELDOR, etc
Steel Tape Measure,Tape Ruler Measurements,Tape Measure Tool,Metal Case Tape Measure
Henan Liangjin Tools Co.,Ltd , https://www.liangjintools.com