blue pigment phthalocyanine dispersion need dispersant DS-197

Model NO.: DS-197
Solubility: Solubility
Name: dispersant
CAS NO.: N/M
Function: disperse organic pigment
Producer: Hi-pereral
Trademark: Toynol
Transport Package: 200kg Drum
Specification: 60%
Origin: Tianjin
HS Code: 3402130090
Toynol® DS-197 phthalocyanine pigment dispersing agent 


blue pigment phthalocyanine dispersion need dispersant DS-197
Characteristics
High performance dispersing agents in water-based system
 
Good wetting effect to pigment and fillings
 
Outstanding deflocculation
 
Provide powerful charge repulsion property
 
Suitable for various powder

Specially suitable for organic pigment dispersion
 
Reduce viscosity of grinding system, improve color development of millbase
 
APEO free
 
Chemical Components

Mixture of Amine alkyl hydroxy affixture of HMW styrene acrylic copolymers and surfactant

Recommended Applications

Phthalocyanine organic pigment(blue/green)
Azo organic pigment(red/yellow)

Physical properties
Typical Properties
Item DS-197
Appearance Yellow liquid
Content(%) 60%
Solvent water

Grinding operation

Dispersing sand mill, Glass bead(0.8-1.2mm), Filling rate 70%
3000rmp/min  60min

Performance evaluation
  • Centrifugal stability: take 20ml millbase into centrifuge tube, centrifuge 10 min under condition of 3000r/min, then take out to observe the layering of millbase. Pour out liquid and calculate amount and percentage of precipitate.
  • Viscosity evaluation:Use Brookfield rotational viscometer.
  • Fineness measure:Scraper fineness meter
  • iscosity stability:Store millbase in 100ml wild-mouth bottle at 40ºC for 24 hours, measure viscosity change,  ±50% change is regarded qualified.

Example1(★:Excellent  ☆:Good )

Experimental pigment: phthalocyanine green G, powder content 30%
Pigment content:                  30
Dispersant dosage(as supplied):    20
Defoamer(Toynol®):               0.1-0.3
Wetting agent(Toynol®):           0-0.3(as appropriate)
Water:                          add to 100%
Item Toynol® DS-197 Imported dispersant
Dispersant dosage(SOP) 40% 40%
Wetting of original powder Quick Quick
Stock solution stability (centrifugation) ★ ★
Dilution stability(centrifugation) ★ ★
Millbase viscosity ★ ☆
Dispersion fineness(μm) ≤2.5 ≤2.5
Change of storage viscosity Without thickening and thixotropy Without thickening and thixotropy

Example2(★:Excellent  ☆:Good )

Experimental pigment: permanent yellow P.Y.12, powder content 35%
Organic pigment content:          35
Dispersant dosage(as supplied):    20.4
Defoamer(Toynol®):               0.1-0.3
Wetting agent(Toynol®):            0-0.3(as appropriate)
Water:                           add to 100%
 
Item Toynol® DS-197 Imported dispersant
Dispersant dosage(SOP) 35% 35%
Wetting of original powder Quick Quick
Stock solution stability (centrifugation) ★ ☆
Dilution stability(centrifugation) ★ ☆
Millbase viscosity ★ ☆
Dispersion fineness(μm) ≤2.5 ≤2.5
Change of storage viscosity Without thickening and thixotropy Without thickening and thixotropy


(When actual operation:First add dispersant into water, then add powder, 4000rmp/min 10min. After powder completely wetting, put into grinding glass beads to start timing grind.)

Recommended Applications
  • Water-based inks
  • Architectural coating
  • Wood and furniture coatings
  • Automotive coatings
  • Can coatings
  • Anticorrosive paint
  • Leather coatings
Operation proposal
  1. Suggested dosage of organic pigment(Based on pigment, Toynol® dispersants calculate solid content SOP):10-50%;
  2. Do not add wetting agents separately;
  3. Toynol® wetting agents can accelerate original powder wetting;
  4. Adding Toynol® defoamers can quickly eliminate grinding foam;
  5. To obtain optimal performance, Toynol® additives must be added in water before resin and pigment;
  6. Advise gradient test;
Packaging/storage
25L/plastic drum;220L/iron drum
As liquid material, this product should be sealed and placed in a dry, cool, well-ventilated place at room temperature

 

3D Printing Ceramics

3D Printing Ceramics,RBSic 3D Printing,3D Printing Service,Ceramic Components Using 3D Printing

Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com