Coil Winding Tungsten Nozzle, Cutting Two Tungsten Nozzle

Tungsten Carbide Nozzle Hard Alloy Nozzle

Product Category: Nozzle series
Product Features:
The product is made prcciscly of hard alloy and cnjoy the hardness up to HRA90. Two terminals and inner hole are all receive mirror surface treatment to ensure cnameled wire makes no scrape.The above form is just an example, can be produced in accordance with customer requirements!

Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit. 

Superior and inferior quality of alloy wire nozzle:
1 nozzle orifice finish: at the junction of its location, hole and arc angle, by visual method is unable to see, only with the high magnification magnifier to observe the side, if there is an obvious mark junction hole and transition arc angle, then the result is brought about by it scratch the enameled wire, if the quality of the nozzle, at the junction of the inner hole and the arc angle it is a natural excessive, no transfer of marks.
Finish 2 in the hole: it is the quality of the product is also very crucial in the process of product winding in the inner hole of the enameled wire is in the mouth of the online beating state, if the internal hole grinding processing is not good, so the scraped line and then the inevitable worth to remind is, now on the market a lot in hole alloy wire mouth is without grinding precision or simple rough machining.
3 hole size precision: precision machining line mouth, its inner hole accuracy can be controlled within 0.01mm, if the hole size is greatly small, break phenomenon often occurs, even the winding insulation failure or interturn short circuit is not hard to explain why.
4 installation size precision: according to the consistency of the packing size is necessary, if it is hard to put into a small equipment fixture, it is easy to fall out of fixture and influence adjustment precision.
5 head and tail shape: R line shape is a key part of the R mouth of the head and tail, R is too large or too small will influence the quality of products and can withstand the tension.


Why do you choose us?
1.100% manufacturer
In hardware tools, the wire winding machine training industry has more than 10 years of experience, we have more than and 100 skilled workers.
2. competitive price
One-stop service, from the material of die cutting process, production, QC, packaging, delivery. We are sure we produce all the goods. And the quality is 100% rest assured. Many customers are very happy to cooperate with us, because we can provide a more competitive price as a factory.
Three. The best choice of material
All of our goods are the best material from the best suppliers, whether the material is qualified can be checked.
4. Quality Control
Before shipment, there are specialized personnel checks, each product in the packaging before the inspection is qualified. We guarantee that each product shipment is perfect for sale.
5. Good service
We promise to answer your question in 24 hours.
 

Flood Light

1. Compact square form-factor outdoor high-power floodlight and Wall Washer for architectural and landscape lightings.
2. Cree or Lumileds LEDs in wide ranges of whites, tunable whites, mono colour,RGB, RGB+W and wide to narrow (3°) beam angles.
3. High brightness contrast level for smooth and consistent color change effect.
4. Extruded aluminum alloy body with high efficient heat dissipation fins, protective vent and clear glass diffuser.
5. Easy and flexible installation with adjustable 60° tit and rotatable mounting base.
6. AC110~220V or DC24V input voltage, Integrated AC power driver. DMX control with auto addressing function.
7. Rated IP 66

Flood Light,LED Flood Light,Architecture Flood Light,High Power Flood Light,Addressable Flood Light,Anti-clare LED Flood Lights,Narrow Beam Angle Flood Light

StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com