Renovation masonry is a major project in home improvement. It is related to the quality of the decoration and the safety of living in the future. Therefore, it must not be sloppy. Many homeowners are initial decoration, there are many places are not particularly clear, for example, what is the price of decoration wall ? What are the factors affecting the decoration wall? What issues should pay attention to decoration wall? No matter, Xiaoqi in the following will be for everyone One by one introduction.
First, the decoration wall prices
Normally, the interior walls of the demolition wall are 60 yuan/square meter, and the single wall of the masonry wall is 88 yuan/square meter, and 240 cm is 128 yuan/square meter. According to the master craftsmanship, the price will be different. The price of a good master is about 200 yuan, and that of an ordinary master is about 100 yuan. It is advisable to find a bricklayer in the local area and ask the market price before making a choice.
Second, decoration wall considerations
1. Before the wall-building work begins, it is necessary to build a solid foundation layer, remove all surface impurities, and sprinkle water on the ground to infiltrate the ground, so as to strengthen the connection between the walls and the ground.
2. The material preparation requirements in the previous period are also extremely stringent. It is necessary to allocate cement mortar with the most suitable proportion, which is generally determined to be three to one, and the number of the cement shall not be lower than 325. It is also necessary to ensure that all bricks are intact and free of cracks, ensuring the strength of the wall.
3. In the concrete wall building process, the standards on the decoration drawings shall be strictly observed, all wall areas and space dimensions must be carefully checked, and errors must be corrected so that subsequent work cannot be carried out.
4. In the process of building a wall, the connection of old and new walls is required. Inside the two walls, a 6 mm thick L-shaped steel bar with a length of not less than 40 cm must be inserted every 60 cm. The anchoring glue is used for secondary fixation. Outside the wall joints, a wire mesh with a width of not less than 15 cm is required to enhance the tightness of the connection between the two.
5. When the walls are built, everybody needs to prepare the plumb bobs and level rule at any time. Each cubicle will be measured at a distance to ensure that the verticality and flatness of our walls are within 4 mm. The vertical contact points must maintain a 90-degree right-angled shape, and all dimensions must strictly comply with the accurate data for engineering acceptance.
7. In addition, if it is necessary to reserve the position of doors and windows on the wall, we must measure the specifications of the entire door and window in advance, and plan their size and position on the design drawings so as to avoid the phenomenon of repeated construction during the actual decoration process. Making the whole wall work difficult.
The conclusion of the article: The price of building wall decoration and the preparatory work before wall building and the considerations for building walls are introduced here for everyone. I believe that as long as everyone in the process of building a wall is always concerned with these points, strict construction, then the final wall effect will inevitably reach our ideal results.
Decoration construction knowledge decoration wall prices
Wall Mounted Basin Faucet,Brass Basin Tap,Basin Faucet Chrome,Bathroom Basin Mixer
kaiping aida sanitary ware technology co.,ltd , https://www.kpfaucets.com