Glass sticker operation method:
First cut the size to a slightly larger size and remove the reverse lining.
Wet the sticker with a damp rag and wet the glass.
Then stick it up, taking care not to leave air. Open the bubble with bubbles and stick it.
Wipe it evenly with a rag. After all the water has been drained, cut off the excess space on the four sides.
(If it's a window glass, you can take the window down and put it a little more.)
How to stick glass stickers:
First wipe off the ash on the glass with a wet towel (do not dry too much), then sprinkle the water on the glass, evenly (if the watering can be better with a watering can), cut the cut glass paper to the paper mold Sprinkle a little water and gently put it on. If it is not suitable, use your palm to flatten it or pick it up again. Don't move it in two or three days, and wait for it to dry naturally.
One thing to note is that water must be used around the window, so that the surrounding area will not stick quickly. If it is not suitable, it will be easy to uncover. If there are bubbles, it must be squeezed out.
Barbed Wire,Stainless Steel Barbed Wire,Coated Barbed Wire Fencing,Pvc Coated Barbed Wire Fencing
Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com