There is no uniform standard on this issue. In addition to satisfying the hot and cold shrinkage factor of the ceramic tile itself, it also needs to be combined with the decorative effect of ceramic tiles. Here are some common tile joints for a reference:
1) The size of seams for seamless wall tiles in kitchens and kitchens should generally be about 1 to 1.5 mm and not less than 1 mm. Air nails or packing tapes can be used as a reference. (Remarks: There is now a kind of auxiliary material for the tile joints in the market - cross, width 1mm, 2mm, 3mm, 5mm, etc. The price is not high, use the cross to stay seams, can be a good guarantee for the connection of the tiles The seam is straight and the gap is uniform.)
2) Special effects can also widen the gap, such as 5mm. Like some antique bricks or external wall tiles, balcony tiles to keep wide seams better. 3) Floor tiles (such as vitrified tiles, etc.) are generally left at about 1.5-2mm when paving.
1) The size of seams for seamless wall tiles in kitchens and kitchens should generally be about 1 to 1.5 mm and not less than 1 mm. Air nails or packing tapes can be used as a reference. (Remarks: There is now a kind of auxiliary material for the tile joints in the market - cross, width 1mm, 2mm, 3mm, 5mm, etc. The price is not high, use the cross to stay seams, can be a good guarantee for the connection of the tiles The seam is straight and the gap is uniform.)
2) Special effects can also widen the gap, such as 5mm. Like some antique bricks or external wall tiles, balcony tiles to keep wide seams better. 3) Floor tiles (such as vitrified tiles, etc.) are generally left at about 1.5-2mm when paving.
Tile balcony door price decorative antique tiles exterior tile ceramic tiles prices balcony tiles
Commercial Electronic Weighing System
Shanghai Liuyuan Trading Co. , Ltd. , https://www.ly-weighing.com