a. See if the stairs you have purchased have registered trademarks, factory addresses, telephone numbers, website addresses, and if there are telephones or websites. It is best to call the manufacturer or check the Internet to prevent the purchase and sale of three products, so as not to be deceived.
b. See if the staircase manufacturing company you choose can produce a complete set of stairs. It is important to see if you can produce a combined stair foundation frame. Because in the production of stairs, the stairs, columns and handrails are relatively simple, and the whole set of stairs is produced by the stairs. The framework involves architecture, structural mechanics, aesthetics and other related professional knowledge. The requirements are quite high and difficult. Non-professional and non-designed R&D companies cannot design or produce fine and perfect products.
c. Observe and understand the exhibition hall, shopping guide, design, installation.
Manufacturers with certain research and development capabilities can provide dealers with a variety of high-quality stair products.
The stair product is a personalized product, and the shopping guide must be professionally trained to accurately provide reasonable stair style recommendations based on the customer's specific conditions. Designers of professional solid wood stair manufacturing companies can provide more constructive and professional advice based on the customer's specific situation. The drawings drawn by the designer are not only the basis for the production of the factory, but also the basis for the installation of the stairs in the future. The effectiveness of the work has an absolute impact on the quality of the stairs.
If you want to know the quality of the installation, it is best to visit the project that your company has installed. Because the factory produces only the stair parts, you need the installer to be in your home, assemble it into a complete set of stairs, and the level of technical level of the installer. It plays a decisive role in the quality of the finished staircase.
Scientific lacquering process determines the important conditions of the texture of the stairs
For wooden buildings, domestic practices are often carried out after the site is installed, and then the painting work on wood products. In fact, this is very unscientific, because the conditions on the construction site will certainly not meet the standards of professional paint booths. Therefore, it is often the overall shape of the stairs is good, but the surface paint is terrible. As the saying goes, "three-point material, seven-point painter." In the western countries, the stairs are treated as a piece of furniture, and the painting work is done in a professional paint room. The only job at the construction site is assembly.
Choose the learning of the treads
For wooden stair treads, you must choose solid wood finger joints or solid wood multi-layer composite boards. After stepping and splicing, the tread plates are not easy to be deformed and cracked, and durable, but the price of finger-jointed stairs is more than multiple layers. The composite board is expensive.
Note the spacing of the railings
If you choose vertical railings, be sure to note that the center distance between the two railings is preferably limited to about 12.5 cm (use a special shape of the stairs to be cautious) to avoid children (such as children playing on the stairs may be careless) Accidental injury caused by slipping.
Bathtub Drain, Basin Drain, Shower Floor Drain, Kitchen Sink Drain
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com