Due to the impact of the international financial crisis, the non-ferrous metal industry in our province has faced unprecedented challenges and tests. The prices of non-ferrous metal products have fallen sharply, exports have been severely hindered, corporate profits have dropped significantly, and production and operation have been very difficult. In order to actively cope with the international financial crisis and help its enterprises to tide over the difficulties as soon as possible, Hunan Nonferrous decided to borrow 1.2 billion yuan from banks to implement the storage and storage of five non-ferrous metal products such as lead, zinc, tungsten, antimony and indium produced by its subsidiaries. When the market price picks up, it will be sold again. In order to help Hunan Nonferrous's implementation of the storage and storage strategy, the provincial finance appropriate loan subsidy.
Meikebao pointed out that implementing the purchasing and storage strategy when the price of non-ferrous metals is low is not only a wise move for enterprises to cope with the financial crisis, but also an important measure for the provincial party committee and the provincial government to help enterprises. It can not only help companies solve temporary difficulties, but also get the right timing. In the process of purchasing and storing non-ferrous metal products, we must follow the principle of “government guidance, market operation, enterprise purchasing and storage, and appropriate financial interest subsidyâ€. We must adhere to reasonable pricing, timely dumping, and strive for win-win.
Mei Kebao emphasized that in the face of the financial crisis, governments at all levels should take insurance companies as an important measure to maintain growth and make helping enterprises one of the top priorities. It is necessary to carry out "one-on-one" assistance for the actual situation of each enterprise and the policy of the enterprise. On the one hand, it is necessary to help enterprises overcome the outstanding difficulties currently faced by fund raising and product sales; on the other hand, it is necessary to take a long-term plan to help enterprises accelerate structural adjustment, carry out intensive processing, and extend the industrial chain. At the same time, we must create a relaxed development environment for enterprises. As a finance and taxation department, the more difficult it is for a company, the more it is necessary to “water the fishâ€. While actively supporting the construction of infrastructure, financial institutions at all levels must attach great importance to the support of the industry, especially to the small and medium-sized enterprises.
Electric recovery winches are more and more popular after COVID-19. To rescue a car around 2ton from muddy road, Electric Winch 5 ton is enough. See below fast speed 12v Winch
The capacity of winches differ from 2000lbs to 20000lbs. Normally winch line pull below 5000lbs are for UTV/ATV, winch line pull between 8000lbs and 15000 lbs are for cars like Jeeps, winches over 15000lbs are designed for trucks.
There are also DC electric hydraulic winches from 10000lbs t0 20000lbs. To install such winches, hydraulic pumps are needed.
Car Winches or electrical 4x4 winches, they are commonly available with either a 12V DC or a 24 V DC motor.so confirm the winch voltage you need before buying a winch. And the voltage does not affect the winch motor housing shape, however the inside motor quality sometimes will. There`s almost no difference between the price of 12v and 24v.
Electric Recovery Winches are powered by a motor that runs off either your vehicle's battery or power steering pump. The vehicle's battery power is transferred through the winch's motor to the gear train, causing the winch drum to rotate the rope or cable in a rapid spinning motion.
When choose an electric winch, take the maximum load that you expect to winch and multiply it by 1.5, then you`ll know which one to choose.
The weight rating of these off road winches is based on the first wrap of the cable around the drum. With each layer of cable, the pull capacity actually drops, so when in doubt, go larger. Below is an example of winch performance of each layer for your reference.
Besides, if you need a fast speed winch, pls also take a look at the gear ratio your suppliers offered. As for winches in 12000lbs, the normal gear ratio is 265:1, if you prefer fast speed, you may choose 158:1, which means the actually line of pull may be smaller at the same time.
If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Winch 12v,12v winch,12v winch for sale
Suzhou DAO Material Technologies Co.,Ltd , https://www.dao-compass.com