Latex paint is a very widely used interior decoration material, it is not only very environmentally friendly, but also according to the owner's decoration needs, a variety of different colors modulated to decorate a variety of different decoration effects. So what precautions do we have when we paint latex paint? What problems will happen to latex paint during construction? Here we will make a detailed understanding with Xiao Bian.
Interior Brush Latex Paint Notes
In the actual renovation, many people will use two or more different paint brands in the same space. This is actually very bad. It is not only prone to chromatic aberration, but also can easily cause quality problems. Therefore, Xiaobian recommends that you use a brand of latex paint of a single type to ensure the effectiveness of construction.
Interior Brush Latex Paint Note II
Before we brush the latex paint, we must modulate the latex paint. The proportion of the latex paint to water should be according to the product description. Add water according to the actual situation to stir, and add no more than 20% water to prevent the prepared latex paint from being too thin. At the same time, the water can not be added too little, too high latex paint concentration is not good.
Interior Brush Latex Paint Notes III
In general, after the putty has dried, it is necessary to sand the wall. The purpose of polishing is to make the wall more even and prepare for the next process. The surface structure of the putty after the overall polishing is more uniform and uniform, which can enhance the performance of the latex paint, and avoid some problems that may be caused due to the difference in the surface structure.
Interior Brush Paint Note Four
After we have polished the wall, we can paint on the wall. In general, we operate on the bottom and the bottom. In order to ensure the effectiveness of the construction, we spray the second pass of the paint should be completed after the first pass of the paint is completely dry, the interval is about 1 hour. Xiao Bian suggested that everyone choose sunny weather construction, and the indoor temperature is above 5 degrees, so it is not easy to appear color.
Xiao Bian suggests that it is best for you to hire an experienced master to construct it so that you can ensure good results. In the process of construction of latex paint, if blisters, anti-alkali powder, tears, bottom and coating are not smooth, and cracks on the wall, etc., it must be handled in a timely manner. The above is Xiaobian's attention on indoor brush latex paint and the common problems of indoor brush latex paint. If you have more questions, you are welcome to continue to pay attention to Qijia Information.
Gate Door,Gate Design,Gate Entrance,Electric Gate
Lemon Building Material Co., Ltd. , https://www.lemonbuilding.com