Today's consumers value the safety of their daily life decoration, and we all know whether the floor decoration is non-slip, which is an important part of walking safety. When doing home decoration, many people prefer polished tiles in the tile market. However, the surface of the polished tiles is so smooth, and people can't help but worry that the polished tiles are not slip resistant. So, is the polished brick not anti-slip? Is the polished floor tile anti-slip effect good?
Many people ask the polished tiles when they buy tiles. In fact, the polished tiles are anti-slip, and its anti-slip properties are the same as matte tiles. In fact, the anti-slip liquid on the polished brick floor can effectively penetrate into the capillary holes of the floor tiles and stone. A small amount of silicon is dissolved to make the original capillary pores thick, and many small invisible nano-scale indentations are formed on the surface. When the polished brick meets the water on the ground, the capillary hole will be filled with water. When the sole or the sole passes through the ground, the water will be squeezed out of the capillary hole to make the capillary hole in a vacuum state, so that the contact with the sole can be Form the role of a physical suction cup. The ground friction coefficient is greatly enhanced. It reduces the risk of slipping and falling after the wet bricks have wet water, and has the effect of “sipping with water and smashingâ€, making the ground wet water more slippery than dry. Moreover, the water absorption rate of the polished brick is low, and the water splashing on the surface of the tile does not absorb. This performance characteristic makes many consumers think that there is water on the brick surface, no matter what the tile will become very slippery, in fact, this is very wrong. To understanding.
Polished brick slip principle
The polished brick has a low water absorption rate and does not absorb water on the surface of the tile. This performance characteristic makes many consumers think that there is water on the brick surface, no matter what the tile will become very slippery, in fact, this is a very wrong understanding. . The glazed surface of the polished brick surface is specially treated with anti-slip treatment. Due to the change of market demand, most of the ceramic tile manufacturers will also properly improve the anti-slip performance of the polished brick. In general, the polished brick is In the past ten years, the anti-slip performance has a qualitative leap, which has made it a leader.
When the tiles are not slippery, do not be impatient. Tiles have been used for a long time, and there will be problems. Wear, glaze and the like are endless. This kind of damage makes it easy for the original non-slip tile to become a veritable "skating rink". The tiles become smooth, as long as the bricks are less creased, water stains are used, hard bottom shoes and sand. At this time, it is recommended that you use some anti-slip agents properly. As long as the polished tiles are cleaned, you can use anti-slip agents. Pay attention to uniformity and clean them after use. This process is not complicated, and each time it is effective. Can stay for a long time.
How to polish the polished tiles
1. Clean up the site and clean the floor. If there is wax on the surface of the floor, remove the wax with dewaxed water before cleaning.
2. Apply anti-skid liquid, evenly apply when applying, master the liquid surface thickness and moisturizing time. If dry surface appears, it should be hydrated in time. It can be tested when there is resistance.
3. Rinse off with water.
4. After the anti-slip treatment is completed, naturally dry for 1-2 hours, if necessary, keep the water wet and then enter the use.
The advantages of polished tiles
1. No radioactive elements. Natural stone is a mineral that has not been sintered at high temperature, so it contains some trace radioactive elements. Long-term exposure will be harmful to the human body; polished tiles will not cause harm to the human body.
2. Basic controllable without chromatic aberration. Natural stone has different chromatic aberration due to diagenesis time and rock layer depth. The polished tiles are carefully matched, and the same batch of products have the same color and basically no color difference.
3. Strong bending resistance. Due to the natural formation of natural stone, the time of forming and weathering are not the same, resulting in different degrees of tightness and strength. The polished tiles are pressed by thousands of tons of hydraulic presses and sintered at a high temperature of 1200 ° C or higher.
4. Strong bending resistance. Due to the natural formation of natural stone, the time of forming and weathering are not the same, resulting in different degrees of tightness and strength. The polished tiles are pressed by thousands of tons of hydraulic presses and sintered at a high temperature of 1200 ° C or higher.
5. The brick body is thin and light. Due to the low strength of natural stone, the processing thickness is large and cumbersome, which increases the load weight of the floor building, poses a potential threat, increases the cost, and increases the difficulty of transportation and paving.
6. Non-slip. It is very important that the floor tiles are safe and non-slip, especially for families with elderly children who value the anti-slip effect of the tiles. The surface of the polished tiles is bright and bright, and many consumers think that the anti-slip effect is poor. If the water is spilled, it increases the safety hazard, so it is too late to choose a matt tile with "light introversion". In fact, all polished tiles are non-slip. If there is dirt on the bricks, the water will smash, so as long as the daily cleaning is done, it will not affect the anti-slip effect. In terms of anti-slip performance, polished tiles are the same as matte tiles.
Guangzhou Jointair Co., Ltd. , https://www.nbjointair.com