| Name of product | specification | Materials | Steel factory / origin | Price (yuan/ton) | Than yesterday | Compared to last week | Than last month |
| Seamless tube | 108*5mm | 20# | No branch factory | 4600 | 0 | 0 | 0 |
| Seamless tube | 133*5mm | 20# | No branch factory | 4700 | 0 | 0 | 0 |
| Seamless tube | 159*6mm | 20# | No branch factory | 4800 | 0 | 0 | 0 |
| Seamless tube | 219*6mm | 20# | No branch factory | 5050 | 0 | 0 | 0 |
Proper clamping is critical to efficiency. This is especially true for metallographic cutting of large workpieces.
If the clamping tool used is not appropriate, the time required to clamp large workpiece will be greatly increased, affecting the subsequent cutting process, the loss is not worth the gain. Worse, large artifacts are more likely to move if they are not clamped. This means extra holding time for cutting or, worse, damage to the sample.
Solution: Use a better or customized gripper tool
If you work with large artifacts frequently, make sure you have a good range of gripper tools to choose from, because having the right tools on hand can save a lot of time.
If you often work with similar-shaped artifacts, custom clamping tools are by far the most efficient choice. Custom clamping tools not only save you time, but also ensure consistency between the sample and the cutting wheel, reducing the risk of cutting wheel deflection, thus ensuring an easily reproducible process.
Cutting Clamp,Saw Straight Edge Clamp,Saw Guide Clamp,Universal Miter Saw Clamp
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com