2) Modular tool system TMG Modular tool system TMG has the following three structural forms of MYCIMT: cylindrical connection series TMG21 (Fig. 4 left), shaft with screw tightening tool; short conical positioning series TMG10 (Fig. 4) The shaft is tightened with a screw; the long cone positioning series TMG14 (pictured right in Figure 4) is used to lock the tool with a screw. The modular tool system meets the processing needs of different parts with the least amount of tools, so the system increases the flexibility of the tool system and is an advanced stage in the development of the tool system.
Figure 4 Modular tool system
3. Introduction to cutting tools
1) Hole machining tool 1 Center drill is used for hole machining positioning.
2 Twist drills are mainly used for drilling holes.
3 Step drill is an efficient compound tool for drilling stepped holes.
4 Reamers are mainly used for the finishing of holes.
5 Sickles are mainly used for reaming and hole finishing.
2) Milling tool 1 Face milling cutter This type of milling cutter mainly has two types: cylindrical milling cutter and end milling cutter.
2 Groove milling cutters The most commonly used groove milling cutters are end mills, three-sided edge milling cutters, keyway milling cutters and angle milling cutters.
3 Mold Milling Cutter The milling cutter has various shapes such as spherical, convex, concave and T-shaped.
4 Combined forming cutters can be combined with multiple milling cutters to process one or more parts at the same time, which not only improves productivity, but also ensures the quality of the parts.
Previous page
Industrial Model,Model Industrial,Industrial Scale Models,Building Construction Model
Nanjing Great Century Art Model Co., Ltd. , , https://www.dsjysmx.com