Many people are very careful when choosing paints. They are worried that the paints will not be able to be bought well and will affect the effect of wall construction or pollute indoor air. . However, in the process of selecting paints, consumers often have the following misunderstandings.
Myth # 1: Anti-crack paint must crack
No matter how old the new house is, the phenomenon of wall cracking is very high. Many people are struggling to choose a good paint to solve the problem of cracking. Once there was a brand-name paint package that was shockingly written "Cracking Resistance". Many consumers think that as long as these paints are used, they can prevent cracking on the walls. In fact, this does not have much effect.
Xiao Bian Weapon: A thin layer of paint film can actually prevent the occurrence of wall cracking, which is unlikely. The "elastic latex paint" currently on the market can generally only compensate for micro-cracks below 0.3 mm. If the wall is cracked, to solve these problems, it is best to use latex paint to make up, or use cement to make up the cracks, and then paint.
Myth #2: Blindly worried about paint environmental protection
As people pay more and more attention to health, many people are not afraid of counterfeit goods but are afraid of decoration pollution. When it comes to renovation pollution, many people immediately think of paint. Everyone believes that paints contain a large amount of toxic substances such as formaldehyde, benzene, and VOCs. Therefore, when choosing coatings, they are also very worried. But in fact, this concern is not necessary. Now that the safety of many coatings has reached a good level, consumers do not have to worry too much.
Xiao Bian Weapons: In fact, many consumers worry about the environmental protection of paint can be said to be blind. Now most of the qualified interior wall coatings are safe, they are generally water-based coatings, environmental protection waterborne coatings produce less formaldehyde, benzene and other harmful substances, generally do little harm to the human body, as long as the interior ventilation attention to the decoration, can Effectively avoid these decoration pollution.
Myth 3: Brands that are overly concerned with paint
Many owners think that buying paints is good for buying well-known brands. Of course, well-known brands have certain quality guarantees, but they cannot blindly pursue brands. In fact, the quality and effectiveness of many ordinary brand products and well-known brand products are not much different, but there is a gap in prices. Reasonable choice of paint is the wise choice.
Xiao Bian Weapons: When selecting paints, we should first understand the quality, reputation and market conditions of various brands of paints on the Internet or other channels. With the same effect of paint, try to choose a more reasonable price brands.
Myth 4: Buying materials is good
Many owners are afraid that they will buy less paint. Therefore, it is a big mistake to buy in large quantities at the outset. This has caused a waste of materials, which has affected the cost of the project. Too much paint has accumulated on the construction site. Cause a certain amount of influence.
Xiao Bian Weapons: Before construction, we must look at the area of ​​the construction area to estimate the amount of purchased materials, usually purchased materials should be 10%-15% more than the budget, so you can reduce the chance of repurchasing materials, and waste Opportunities can also be reduced to a minimum.
Paint Coatings Purchase Precautions Lighting Brand Coating Paint Interior Decoration Latex Paint Formaldehyde
CLUTCH RELEASE BEARING
provisions to guide the fork or Piston radially.
Our compact design combines a precision sheet metal bearing unit and polymer sleeve or carrier, for manual gearbox applications against a dry clutch. We offer multiple designs with inner or outer ring rotation for a variety of applications.
The units are designed to account for many constraints, including: automated manual transmission or dual clutch transmission. higher operating temperature; and increased application loads.
MODEL
|
70x116.6x27mm Japan Original Auto Clutch Release Bearing CT70B
|
MOQ
|
1PCS
|
Guarantee
|
50,000km or 1 year
|
Type
|
Brand new Type
|
Price
|
Factory Price
|
Brand
|
SEMRI
|
Aftermarket
|
Oem Replacement
|
Size
|
Same as original
|
Package
|
1.one pcs one box
2.White box and carton 3.Customer brand design |
NO.
|
NSK NO.
|
KOYO NO.
|
NTN NO.
|
NACHI NO.
|
VKC3581
|
24TK308E1U3
|
RCT356SA8
|
FCR48-11/2E
|
55SCRN41P-6
|
VKC3584
|
35TMK29C1
|
RCT356SA9
|
FCR47-8-4/2E
|
55TMK09-1
|
VKC3588
|
50TKB3504BR
|
RCTS33SA1
|
FCR44-9/2E
|
55TMK804
|
VKC3592
|
50TKB3501BR
|
RCTS33SA3
|
FCR44-36-1/2E
|
55TRK30W1
|
VKC3598
|
50TKA3805
|
RCT363SA
|
FCR44-25-4/2E
|
60SCRN033
|
VKC3600
|
33TKD03U3
|
RCT371SA
|
CT52A-1
|
60SCRN31P
|
VKC3602
|
50TKA3305R
|
RCT37SA1
|
63TNK001
|
60SCRN31P-6
|
VKC3606
|
48TKB3204R
|
RCT38SLI
|
60TMK20
|
70TNK-1
|
VKC3607
|
48TKB3202
|
RCT40
|
55TRK30A/2E
|
BC11S3
|
VKC3609
|
48TKA3301
|
RCT401SA
|
55TMK804
|
|
VKC3610
|
48TKA3214
|
RCT4064SL1
|
55TK30A
|
|
VKC3615
|
48TKA3211B
|
RCT4067A2RS
|
40TMK29
|
|
VKC3675
|
48TKA3210
|
RCTS355SA
|
40TMK20
|
|
VKC3616
|
48TKA3201
|
RCT4075-1S
|
|
|
VKC3666
|
35TMK29B2
|
RCT40SA3
|
|
|
VKC3668
|
47TKB3102B
|
RCT422SA1
|
|
|
VKC3617
|
47TKB3101
|
RCT45-1S
|
|
|
VKC3618
|
47TKB3001A
|
RCT473SA
|
|
|
VKC3621
|
47TKB2901UN3S
|
RCT55B
|
|
|
VKC3622
|
45TKD07U3
|
RCTS28SA
|
|


Clutch Bearing,Auto Clutch Release Bearing,Clutch Release Bearing,Clutch Bearing For Auto
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com