Polished tile surface seepage cleaning tips

With the advent of the renovation season, the owners who are going to decorate have entered the actual stage of selecting decoration companies and purchasing building materials. At home, it is inevitable to involve the paving of floors, tiles, and the like.
During the renovation process, many people will unconsciously look up at the ceiling and observe the wall at a close distance. They think that this is the most important facet project, but often neglect the work under the feet, because most people think that there is a floor, Not much emphasis on a floor tile. However, problems were discovered after waiting for the paving and it was very troublesome to solve it again. In fact, according to professionals, in the spring renovation, there are many places worth paying attention to.
Whether it is paving wood floors or tiles, ground waterproofing should be done carefully.
When the cold floor overhead layer is easy to trouble due to the large temperature difference between day and night in spring, so in the paving of the floor and floor tiles should pay attention to moisture, moisture from the material and other issues. Zhang Gong, president of the focus home network decoration university, told reporters that when choosing the floor, attention should be paid to the moisture content of the wood, especially solid wood flooring. If the moisture content is too high, the water will be distorted after the floor water is dispersed.
In addition, as a traditional way of installing wooden floors, the keel method leaves an overhead layer between the floor and the floor. It is not easy for the moisture in the keel and inadvertently infused beverages, milk and other liquids to evaporate, and it is easy to breed bacteria and insect pests. The viscose installation method and metal keel installation method can avoid the disadvantages of wood keel installation. The viscose method uses environmentally friendly floor glue to glue the floor blocks directly to the cement floor, eliminating dust and wormholes under the floor. In recent years, the most popular lock-type flooring can not only be glue-free paving, the seams on the floor are very tight, and it can be repeatedly disassembled and reused several times.
The supervisory supervisor Xu Guozhong who has not touched the millions of floors after the quality inspection pavement reminds the majority of the owners that during the paving of the ground, attention should be paid to the three steps of the pre-paving surface treatment, wood floor covering and tile paving.
Ground treatment before pavement: First, clean the floor. Ensure that the ground is flat, dry and clean. Second, waterproof moisture treatment. The waterproof coating should be applied evenly. The joints should be filled with paint or cement brush, and a water-resistant coating with a height of 30 cm should be applied close to the water pipe. Third, if the ground environment is too moist, you should use pearl cotton bottoming, while the back of the floor should also be coated with a layer of moisture protection paint.
Wood floor pavement Note: First, the wood floor water content should be about 11%. Second, after the floor is bought home, it is best to store it at room temperature between 16°C and 18°C ​​for two days. Third, about 1 cm of floor expansion joints should be reserved between the floor and the wall.
Tile pavement considerations: First, pay attention to the water content of the tiles. The surface is smooth and delicate, and the back feels soft with a suitable moisture content. Second, pay attention to the difference between tile ceramics and porcelain. The percussion sounds crisp and clear is a porcelain brick with a low water absorption rate, and the percussive sound is a clay brick with a high water absorption rate. Spring decoration should use porcelain tiles with low water absorption.
In addition, avoid moving and placing heavy objects within 48 hours of floorboarding to allow enough time for the glue to stick. Freshly-laid floors are best cleaned with a vacuum cleaner or broom.
Experiences on wood flooring do not use acid-base liquids to clean up Mrs. Mrs. If the housewife floor has stains, it must not be cleaned with strong acid-base liquids. In my experience, clean light-colored composite wood floors. You can use a rag to dip clean the rice water directly on the floor, or evenly spray the rice water on the floor and wipe it with a dry rag after 5 minutes.
If you encounter oil stains, paints, inks and other difficult to clean the stains, you can make special stains oil wipe; if it is blood stains, juice, wine, beer and other residual stains, you can use a damp cloth or use a rag to wipe a proper amount of floor cleaner.
Paving tiles should keep cement away from sources of water. Ceramic tiles are also available in spring. Since the tiles are dry products, if the tiles are not well handled on rainy days and the weather is dry, the cement absorbs the surrounding moisture and will cause the tiles to bounce or burst. Therefore, before laying the floor tiles, it is best to cover the surface of the cement with kraft paper or plastic cloth, and try to keep it away from the water source to prevent it from getting wet or condense into pieces. In addition, after paving the floor tiles, you can not step on them immediately.

Tiles buy Del flooring Nature Flooring Cement Paint Paint Home Decor Home Decoration Find Decoration Company Alright Floor Tiles Home Furnishing Tiles Floor Tiles Decoration Home

LED Down Light

China LED Down Light Suppliers

Smart, 2.4G remote control, microwave sensor, led down light

Here you can find the related products in led down lights, we are professional manufacturer of led down light. We focused on international export product development, production and sales. We have improved quality control processes of down light to ensure each export qualified product.
If you want to know more about the products in led down light, please click the product details to view parameters, models, pictures, prices and other information about led down light.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about led down light!LED Down LightLED Bluetooth Down LightLED Microwave Sensor Down Light2.4G Remote Control LED Down Light





Company

Founded in 2004, Jiangmen YIDENG Lighting Technology CO., LTD has evolved into a global company that designs, engineers and manufactures innovative and decorative lighting solutions with a new sustainable LED collection for residential, retail, hospitality, museum, industrial and commercial applications.

We have developed an extensive line of award-winning LED luminaires including patented products and revolutionary LED fixtures. Technical innovation is central to what people have come to expect from YIDENG Lighting brand.

YIDENG Lighting has become a recognizable brand name as the microwave sensor leader with a stellar reputation for excellence in technology and design: a reliable name that you can trust for superior quality, innovative technology and superlatives service.

Jiangmen Yupdeng Lighting Technology Co LtdSmart Lamp CertificationYupdeng Lighting CompanyYupdeng Lighting CompanyHonor5Honor4Honor3Honor2Honor1


· Please click on the pictures and words for details.

· We are also professional on indoor and outdoor lighting product for projects.

· Such as:LED Spotlight, LED Down Light, LED Track Light, LED Ceiling Light, LED Ceiling Light Module, LED Bulb, LED Step Light and other small lighting products as so on .

· We are not only a manufacturer, but also your expert lighting solution provider.Anything you ask, we will try our best to meet your requirements.


LED Bluetooth Down Light, LED Microwave Sensor Down Light, 2.4G Remote Control LED Down Light

Jiangmen Yideng Lighting Technology Co,.Ltd , https://www.jmyideng.com