Anti-corrosion wood is treated with the world's best anti-corrosion technology, vacuum-pressurization-vacuum. It is mainly used outdoors and in poor conditions. The purpose of anti-corrosion processing is to enhance the resistance of wood in the field environment. Biological invasive ability. However, wood is a natural material. When it is used outdoors, its moisture content changes with the change of climate, and cracking and deformation will inevitably occur. Therefore, proper use and installation can minimize such occurrences.
Brand shop: plate
The use of preserved wood must follow the following procedure:
1. In the construction site, preservative timber should be stored under ventilation and sun exposure should be avoided as much as possible.
2. During the construction, the existing size of the preservative wood should be used as far as possible. If cutting, drilling, etc. are required, the CCA preservative must be used for brushing and remediation to ensure the service life of the preservative wood.
3, try to use a long board to reduce the joints in the construction of the terrace, in order to look beautiful; 5-10mm gap between the board surface.
4. Use hot-dip galvanized fasteners or stainless steel and hardware for all connection points.
5. If you need to further protect the wood, you can paint wood lacquer to reduce cracking, but it must be done after the wood is dry.
6. Installation of CCA-preserved wood: It is recommended that workers wear gloves, wash their hands before eating, and waste wood or sawdust must not burn.
Hardware lighting brand stainless steel paint
Printech steel coil, is precoated steel coil, the substrate could be galvanized steel, galvalume steel. The surface of steel are coated with different designs such as wooden, brick,stone, army, corten ..... the printech stell coils could be profiled into fences, cladding, wall panel, shelvel, cabinets, it's strong and has long service life.
We have differenct choices for coating selection, PE, HDP, FEVE, PVDF, which could be used interior or exterior as per the environment.
The specification we offer:
Prepainted steel coil/sheets:
1. Base metal: galvanized steel zinc20-zinc275g/㎡
aluzinc steel AZ20-AZ150G/㎡
stainless steel
2. Coating: PE, HDP,FEVE, PVDF
3. Thickness: 0.2-1.2mm
4. Width: within 1300mm
5. Colors: solid color, wooden, stone, army, corten, hairline,etc
Printech Galvanized Steel Coil,Printech Wooden Steel Coil,Printech Ppgi,Wood Color Ppgi Roll
Shandong Wofeng New Material Co., Ltd. , https://www.wofengcoil.com