Teach you how to choose geothermal floor

Due to the special nature of geothermal heating, the requirements for the floor are very strict. The special floor for the geothermal industry must have good heat transfer performance, better thermal stability, better environmental protection performance, and good "defective" resistance to deformation. It is recommended to choose laminate flooring. Because the thickness of the composite floor is mostly 7~8mm, it is easy to transfer the heat generated by the geothermal system to the surface, and the surface of the composite floor is a wear-resistant layer of metal oxides. The heat spreads very quickly and evenly on the surface. The solid wood floor is relatively thick, the general thickness is about 2cm, but also when installing keel, so the heat of the geothermal system is not easy to transfer to the surface, and the thermal conductivity of the wood is very low, this will lead to waste of heat, but also make the surface temperature Uneven, the temperature difference is very obvious.

Imported flooring quality meets the European Enpr13329 standard, and domestic flooring quality meets the national GB/T1802-2000 standard. Both can meet the technical requirements for geothermal heating floor installation. At present, some qualified brands in the market have reached this standard. The effect of the lock-type floor is better, because there is a small gap between the hook floor, so it is not easy to go out after expansion.

In order to increase the amount of heat conduction, the thickness of the cushion material and the floor should not be too thick, the standard thickness of the geothermal floor is 6.5-8.5mm, the reinforced laminate floor should be 6-8mm, and the three-layer parquet is 8-9mm. Consumers are advised to use a small size, preferably a square or herringbone shape of 200×40×10, to make it uniform in thermal deformation. If you choose to strengthen laminate flooring, you can use special geothermal floorings from famous brands such as Shengxiang, Sihe, Ruijia, Hongnai, Oudian and Baili. These manufacturers have strict requirements on the density of the substrate, the same thickness and strength, breathability, heat dissipation and good heat resistance through special treatment.

Del floor nature floor

Ring-grooved Lock-Bolt

Ring-Grooved Lock-Bolt,Ring-Grooved Lock Bolt,Ring-Grooved Bolt Latch,Ring-Grooved Barrel Bolt Latch

KD METALS (JINGJIANG) CO.,LTD , https://www.toprivet.com