Characteristics:
§ Height Up to 79m
§ Work with standard concrete foundation or Ambor quick base
§ Standard monopole and Concealment
§ Ambor designed platform-Lower weight and lower EPA
§ International Design code
Specifications:
| Type | Straight Pole ,Tensile Pole ,Turn Pole |
| Suit for | Electricity distribution |
| Shape | Conoid ,Multi-pyramidal , Columniform,polygonal or conical |
| Material | Usually  Q345B/A572,minimum yield strength>=345n/mm2      Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- |
| Tolerance of dimension | +- 2% |
| Power | 10Â KV ~550 KV |
| Safety Factor | Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 |
| Design Load in Kg | 300~ 1000 Kg applied to 50cm from the top pole |
| Marks | Nane plate through rivert or glue ,engrave ,emboss as per customer requirement |
| Surface treatment | Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
| Design of pole | Against earthquake of 8 grade |
| Wind Speed | 160 Km/Hour . 30 m /s |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strength | 490 mpa |
| Max ultimate tensile strength | 620 mpa |
| Standard | ISO 9001 |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We have past flaw testing. Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 |
| Thickness | 1 mm to 30 mm |
| Production Process | Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr →Galvanization or powder coating ,painting →Recalibration →Thread →Packages |
| Packages | Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data. |
Material Test:
1. All of our material are purchased from famous mill factory to assure the quality
2. A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory; otherwise we have our reason to refuse the material.
3. Before put into production, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength and component. Â
Production process:
We can design according to your demands! we can do all kinds of steel towers, Please feel free to contact us!
MD Sole is a kind of material which has the characteristics of light, elastic and anti-seismic performance.Also called PHYLON base.The hardness is controlled by the foaming temperature.Can reduce foot burden.
The medium base of general shoemaking, and the mixed substance made of EVA foaming with heated compression (EVA secondary high-pressure molding)
When the sole is too hard or too thin, the impact of the ground directly on the foot, making the foot prone to fatigue and strain.MD sole is soft and elastic, so it can disperse the impact evenly. The weight of the shoe increases by 1 gram, which is equivalent to adding a few dozen grams of weight to the person's back.As a result, you can choose lightweight and flexible shoes to reduce your physical burden.
MD Sole
MD Sole,Sport Md Sole,Rubber MD Sole,MD Eva Shoe Soles
Greateagle Safety Products Co., Ltd. , http://www.greateaglesafety.com