Run using the panel. First, F=550, after running, it is found that regardless of the starting process or the stopping process, when the output frequency reaches about 450HZ, it does not change according to the acceleration/deceleration time, and the change is very slow. When the above phenomenon occurs, it can be solved by adjusting parameter 11-05 (M1IdsRef Limit). After 11-05 is changed from factory value 90 to 110, the acceleration/deceleration process is normal.
Figure 2 (F = 590, 11-05 = 180) acceleration curve
(4) Inertia estimation and ASR automatic adjustment. The parameters 11-00=2, F=200HZ, 01-12=01-13=1, the inertia parameter measured after positive and negative reversal is 49, then 11-01=1, observe the rigidity of the motor, and make the corresponding parameters modify.
(5) Setting of external I/O function:
Referring to Figure 1, MI1 is a single point positioning, MI2 is the first/second acceleration/deceleration time switching, and MI3 is the pulse position command input enabling single point positioning. FWD/MI1 is closed and the inverter performs positioning operation. The following parameters are related to the sensitivity of the positioning and the stop position during positioning. When adjusting the position, the spindle can be stopped at the position to be positioned and the G state value on the panel is observed. After determining the position is correct, the observed G value is filled in. 10-19; the sensitivity of the positioning process is changed by adjusting 10-21/10-22, the larger the 10-21, the smaller the 10-22, the faster the reflection, the shorter the positioning process; the smaller the 10-21, 10 The larger the -22, the slower the reflection and the longer the positioning process.
Previous page next page
These tip combs are for use with the Pharma KingFisher Flex 96 Deep-Well Head Magnetic Particle Processor or MagMAX Express-96 Deep-Well Magnetic Particle Processor in combination with PrepSEQ ResDNA kits and ProteinSEQ kits.
Optimize performance using KingFisher Flex System consumables designed specifically for use with these instruments. KingFisher Flex disposable plastics (tip combs and microplates) are made of polypropylene and are ideal for magnetic particle processing because of their low binding affinity for biomolecules. Their special design enables excellent recovery of magnetic beads.
The tip combs are made of PP material, they can be used with 2.2ml square well V bottom and 0.5ml elution plates for the system KINGFISHER FLEX. The tip combs could suffer centrifuge 3000-4000 and don't change the original shape. The products are suitable for the standard ANSI and multi-channel Pipette Tips machnie and automatic equipment. We could accept OEM/ODM.
For use with Viral RNA extraction, DNA extraction, RNA/DNA quantification, immunopreciptitations and many more KingFisherâ„¢ applications
good chemical and physical resistance: e.g. phenols, chloroform, DMSO and temperatures as low as -80°C/-112°F
Tip Comb,Tip Comb Plate,Kingfisher Tip Comb,Tip Comb Kingfisher,Magnetic Tip Comb,8-Strip Tip Comb
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yypcrtube.com