The reporter learned from the Chengdu Consumers Association Home Decoration Industry Complaint Station that the two major aspects of woodworking and waterproofing in home improvement are the most prone to quality disputes, accounting for more than half of the total number of renovation complaints. At present, it is in the spring season of decoration. Senior senior Master Wei reminded the friends: "You don't have to guard the construction site every day, but you must keep an eye on the two problem areas of woodwork and waterproof engineering."
Waterproof construction stage
Check the waterproof material, first level and then waterproof
The waterproof problem has always been a difficult problem in the decoration. The waterproof project is mainly waterproof in the bathroom. If the waterproof is not in place, not only will the neighbors downstairs suffer, but their walls may also be soaked and soaked. When you install a friend to the construction site, you must check the quality of the waterproof material. See if the waterproof material packaging bag is consistent with the promises in the contract. If necessary, you can also ask a professional to identify it. In addition, before making waterproof, you must first level the ground with cement mortar, and then do waterproof treatment. Supervising workers in accordance with this process, if the ground is not smooth, paint the best waterproof coating, the thickness will be uneven, and the same will leak later.
View construction brushing, remember waterproof test
Waterproof construction must be done to be fine enough. The most feared decoration in the peak season is that the workers are busy and panic to do waterproofing. It is necessary to supervise the workers in the construction site, paying special attention to the joint between the wall and the ground, and the joint between the water pipe and the ground, which is not easy to be painted; there is also the corner of the wall and the ground. It is also easy to ignore. In addition, check whether the waterproof wall surface of the bathroom is 1.8 meters high to prevent the water from seeping through the wall. If the bathroom wall is a non-load-bearing light-weight wall, the entire wall should be covered with waterproof. Finally, after the waterproof construction is completed, the workers must be in front of you and do the waterproof test together---block the sewage, and build a 25-cm "can" at the bathroom door, and fill the water 20 cm high. After 24 hours, check the surrounding walls and the ground for leaks.
Wood construction stage
Monitor whether the moisture content of wood is moderate
Almost every home decoration in the decoration has wooden works, such as wooden lines, decorative frames, fixed furniture and so on. The moisture content of the wood is not controlled during the construction, and the temperature difference changes the wood products are prone to quality problems such as cracking, warping and deformation. Generally, Chengdu family decoration, moisture content is 8%-12% is appropriate. The installation of friends to the site also requires supervision of whether the workers have placed all the purchased plates on the site for a few days, so that the moisture content of the plates is close to the indoor level. Then, after checking all the wood products on site, install the paint immediately, because this layer of “top coat†can not only protect the wood products, but also protect the water and maintain the normal moisture content of the wood.
Supervise the details of the process
The key to the stability of wood products lies in on-site construction. Although many decoration owners do not understand the crafts and have no time to supervise the construction site, experts suggest that during the construction of the wood season during the peak season, it is best to go to the site to check, mainly to see the wood construction. Some details are handled. Prevent workers from cutting corners and drowning water in the white latex of bonded wood products. This will reduce the strength of the binder, and after the wood products absorb the moisture, the water content will change, and quality problems will occur later.
Chengdu Business Daily reporter Zeng Ting
Slewing Ring
And rest assured, our highly trained technicians go the extra mile to ensure your rebuilt Excavator Slewing Bearing lasts as long, if not longer, as the original.
We have been serving either in domestic market or overseas market, over 12 years` experience in Excavator Parts area enable us to have firm cooperation and partnership with many overseas customers.
JHHENG carries a wide selection of excavator Slewing Ring guaranteed to perform at the highest standard. Each aftermarket component has undergone QA inspections and testing to meet and exceed industry benchmarks. Our vast selection of aftermarket Undercarriage Parts is sure to get your excavator back in the field in no time.
We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler Excavator Final Drive, Travel Motor , Travel Gearbox, Swing Device , Swing Motor , Swing Gearbox ,hydraulic pump, main Control Valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.
If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!
Slewing Bearing,Slewing Ring Bearing,Slewing Gear,Slewing Ring Drive
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.sdjuhengmachine.com