Kitchen decoration Feng Shui is very important to decorate Feng Shui. Good kitchen decoration Feng Shui is good for the health of family members. Therefore, everyone should not only pay attention to kitchen design and kitchen style, but also master some knowledge of kitchen decoration Feng Shui, so as to avoid The inconvenience caused by the kitchen feng shui. Let's take a look at the unsuitable orientation of the feng shui in the kitchen.
1. The southwestern part of the same soil is not suitable for the kitchen. Because the southwest is the Kun position, it is leaking, and the relationship between the airflow is easy to form convection, which is unfavorable to the elderly in the family.
2. The south is a fire. If the kitchen is located in the south of the house, the yang will be too strong, which will make the character of the family violent and contradictory.
3. The kitchen should not be in the northwest or the west of the house. The two directions are gold. This is the image of “fire and goldâ€. The main luck is repeated, especially in the northwest. There is a saying that “the fire is burning the gateâ€, which is easy to cause Conflict with the elders in the family, and has a greater impact on the body of older men in the family.
The three orientations described above are the most unsuitable orientations in the kitchen feng shui layout. I hope everyone can help you after understanding. If you want to know more about the feng shui of the kitchen, you can log in to the groundhog network for detailed information.
Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com