In the use of the vortex pump, due to its relatively small size, light weight, to the operator's work has brought great convenience. Of course, its good operation was implemented on a proper installation basis. This requires the operator to correctly grasp the installation of the vortex pump. Vortex pump installation method First of all, before installing the vortex pump, you need to put it in a ventilated and messy location, to avoid the surrounding environment, the wet use of the equipment impact. At the same time, you also need to keep it in a stable place, without any inclination. Second, when installing, care should be taken to align the direction of rotation of the impeller of the vortex pump with that of the fan's arrowhead. The vortex pump will not operate if the orientation of the installation is incorrect. Then, taking into account the working pressure of the vortex pump, can not exceed 8kpa, to avoid too much heat generated by the fan on the use of vortex pumps. Finally, pay attention to the mounting position of the bearing, the bearing can be installed in the middle of the pump cover, you can also install it in the pump body. The two different installation methods, but also makes the operator usually maintenance of the vortex pump, to adopt a different maintenance methods. Extended reading: Top ten brands of motorcycles Canton Fair Central China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat: 2355962924) http: //beng.liuti. cn / (Service Hotline: 400-6030-811)
