Vortex pump is mainly by rotating the impeller on the force of the liquid in the direction of the liquid to the liquid to impulse momentum transfer kinetic energy in order to achieve delivery of liquid. Then what are the requirements of its working conditions? Working conditions of the vortex pump 1. Suction inlet can not be less than the pump inlet, to have adequate water, such as the water source below the pump suction inlet valve needs to be installed. Pump hydrostatic test greater than or equal to the total l.5 times. Pump body material is cast iron, ductile iron, stainless steel, special materials, please put forward when ordering. Flange connection 1.6Mpa, 2.5Mpa, 4.0Mpa, 6.4Mpa. According to different head, different materials, flange connection is also different. 2. Ambient temperature 3. The conveying medium can not contain hard particles. 4. This series pump will be equipped with filter, return valve, regulating gate valve, check valve explosion-proof wave check valve, combination meter valve, pressure Table 5. Automatic with electronic control box and electrical contact pressure gauge or inverter control. 6. For boiler feed water only for single pump, no other accessories. The above is about the working conditions of the vortex pump requirements, I hope we read these contents, in practical application of help. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)
Led Floodlight,Led Flood Lamp,Ip66 Led Flood Light,Outdoor Led Flood Lights
Guangdong Smart Street Lighting Co., Ltd , https://www.fldlight.com