We are not very strange in the hanging cabinet, they are generally used in the kitchen. It not only can play a decorative role but also has a very practical function, so it has been deeply loved by consumers, but when we chose the installation, I found that I don't know how to install it. So what do we need to pay attention to when installing the cabinet? Today, Xiaobian will take a look at the cabinet installation skills and installation precautions!
Wall cabinet installation tips:
1) According to the installation position of the fan, determine the hardware model and the direction of the split fan. Generally, the right fan in the opening direction should be the cover fan.
2) Check the size of the frame: the height of the frame should be measured at both ends; the width of the frame should be at the top, middle and bottom of the frame, and the corresponding part of the fan should be dotted.
3) According to the scribing, the frame fan will be trimmed for the first time, so that the frame and the fan are suitable for the seam. The test and the second planing line are prepared. At the same time, the position of the frame and the fan hinge groove is drawn, and the dash is avoided. Raise your head up and down.
4) Shovel and splicing page slot mounting hinge: According to the hinge position of the marking, use the flat shovel to cut out the hinge edge to close the page slot.
5) Installation: When installing, the hinge should be pressed into the hinge groove of the fan first, and the fixing screw should be tightened. The depth of the groove should be adjusted during the trial installation. Adjust the gap of the frame and the hinge on the frame. Screw one screw first, then close it. The inspection frame and the fan are flat and free of defects. After meeting the requirements, tighten all the screws.
Wood screws should be nailed into the full length 1/3, screwed into 2/3. If the frame or fan is yellow bud or other hardwood, the hinge mounting screws should be positioned and the hole diameter is 0.9 times the diameter of the wood screw, and the depth of the eye is 2/3 length of the screw.
6) Install the split fan: firstly measure the size of the frame and the fan, determine the middle seam and the depth of the cut, and then plan the groove after the line is used. When the test is suitable, install the left fan first and then install the cover fan.
6. Hardware installation: The variety, specification and quantity of hardware are installed according to the design requirements. Pay attention to the choice of position when installing. If there is no specific size, the operation will be carried out according to the technical basis. Generally, the sample should be installed first, and after installation, it will be installed in a large area.
Cabinet installation precautions:
First, should be completed before the indoor plastering is completed
Because the kitchen cabinet is suspended in the air, it is necessary to connect the cabinet with the connecting piece so that it can be hung in the air. The frame installation of the kitchen cabinet is a key point, which is directly related to whether the cabinet is installed firmly. . The decoration experts suggest that the installation of the kitchen cabinet frame should be completed before the indoor plastering, so that the interior of the cabinet will make the cabinet frame more firm and prevent potential safety hazards.
Second, the height of the cabinet installation
Most people will compare the height of the headache cabinet during installation, because this requires specific analysis of the specific situation, according to the height of the family hostess to determine the height of the cabinet from the ground, in general, the height of the universal cabinet is 1580mm from the ground. Between 1600mm, it is too high to take things above the wall cabinet, it is too low to be easy to meet when operating. But there is no need to stick to this number. It is best to let the members responsible for cooking at the kitchen stand in the kitchen when installing the wall cabinet, and determine the height of the wall cabinet installation according to the comfort of her operation.
Third, the size of the hanging cabinet
According to experts who have been decorating for a long time, the height of the kitchen cabinet itself is preferably 50 cm to 60 cm, the depth is 30 cm to 45 cm, and the length is 120 cm to 390 cm. This size allows for the maximum storage of kitchen utensils and meets the needs of people.
We all know about the role of the cabinet, so you need to have a certain understanding of the installation steps when you choose to install the cabinet. The above is the small cabinet installation technology and installation precautions that are introduced for you today. It is over here. For more information, please continue to pay attention to the decoration home.
More related wonderful reading:
Balcony cabinet installation requirements, balcony cabinet installation considerations
How to install the wall cabinet? Wall cabinet installation method and precautions
Shen Zhou City Hongda Hardware Products Co.,Ltd is a family owned company, founded in 1998, loacated at Tang feng industry zone, Shen Zhou. It has covered an area of 20 hectares, with a total asset of 20 million and more than 300 people with 80 engineering technicians, a 5-person research group, and a service group dedicated to provide the best solutions.
Gabion Wire Mesh,Heavily Galvanized Gabion,Galvanized Gabion Mesh,Gabion Basket Screen
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdgabion.com