[Asia Pump Network News] Sanitary level double helical pump, is the crystallization of modern design technology and modern high-precision manufacturing technology; is the production of new technology and equipment manufacturing industry integration. Now that the health double helical pump in use, what are the considerations. Sanitary double helical pump Sanitary double helical pump Notes 1, Usually turn on the mechanical seal before starting the cooling water, shut down when off first cooling water, tap water cooling, cooling water pressure ≤ 0.02MPa. The material must enter the working chamber before it can be switched on, and it must be ensured that it will not run out of material in order to prevent the mechanical seal from burning out due to high temperature or affecting the service life. Cooling water inlet and outlet fittings equipped with hose size Φ5 (diameter) × Φ8 (diameter). 2, Make sure to turn on the machine seal cooling water, jog open the motor, confirm the motor steering and the spindle steering signs consistent operation. 3, metal shavings or hard and unbreakable debris into the working chamber is strictly prohibited, so as to avoid the destruction of work head and equipment destructive. 4, in the course of operation in the event of abnormal sound or other faults, should immediately stop checking until the fault is removed and then run. After the shutdown should be the working chamber and the spiral head clean. 5, such as the process needs, the working chamber can be used with the jacket for cooling or heating of the material, turn on the coolant or heat transfer oil. Jacket working pressure ≤ 0.2MPa, when processing the temperature requirements of the material (such as chocolate sauce, etc.), you must heat or cool to normal operating temperature, crank, boot. 6, equipment used in flammable and explosive environment, you must use the appropriate level of riot motor. 7, after processing, must be cleaned, so that both to maintain the work efficiency of rotor and can play a role in protecting the mechanical seal. If necessary, design and install a cleaning cycle device near the periphery. 8, Regularly check the screw and found that excessive wear and tear, should be promptly replaced the appropriate components to ensure the delivery effect. 9, the operation found in the shaft leakage see the imagination, you must adjust the machine seal pressure after shut down. 10, in the use of the equipment before the development of the corresponding production safety operation rules to ensure the safety of personal equipment. In the electrical control system users want to set the safety protection system, and there is a good and reliable electric motor grounding device. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)
European Hinges,European Door Hinges,Euro Style Hinges,European Style Hinges
Jiaxing Gates Hardware Products Co.,Ltd , https://www.jxgateshardware.com