Recently, the Tibetan Friendship Circle has suddenly blown up the lobular rosewood mud material, but what is the lobular rosewood mud material wind? When Xiaobian just touched the red sandalwood, he had not heard of any "mud" in the lobular rosewood . What is the lobular rosewood mud? What are the characteristics? Is it good? Let me talk about some of the views of Xiaobian on this issue.
Among the value indicators of lobular rosewood, the determinants of whether the internal physique is excellent are density and oiliness, which are directly proportional. Generally speaking, the higher the density, the higher the oiliness of the rosewood. The higher the oily rosewood, the greater the probability of success after forming a glass bottom after playing.
1. The red sandalwood grows in a fertile environment and is easy to grow faster. Then the color difference between the growth and the annual rings will be more obvious and parallel. The newly made rosewood carvings or bracelets are usually black and red, which is more chaotic. The same duct will also absorb a lot of nutrients and water due to the fertile land, causing the red sandalwood to produce more ducts to absorb nutrients. These red sandalwood pipes that grow in fertile land are then dense and dense.
2. If the environment is relatively poor in the poor environment of the land, the growth is slow, the growth pattern is finer, the color between the growth lines is even, and the color of the red sandalwood is more uniform. The catheter is also relatively insignificant and less distributed. (The kind of mud that is almost invisible to brown eyes is praised as mud.
We all know that rosewood is composed of cells, tracheid cells and lignin cell walls. The cells form lignocellulosic tissue, which is a conduit for transporting juice along the stems, also known as brown or cow hair. The denser the wood fibers are arranged, the smaller the brown eyes are, and the higher the density. When the brown-brown line of the lobular rosewood is extremely small and even invisible to the naked eye, it is the so-called "mud". It can be understood that the mud material is in a state in which the density of the lobular rosewood is very high. Therefore, the mud is usually also the oily red sandalwood, so it is the easiest to plate out the glass bottom. Of course, it is not that only the mud material can make the glass bottom, emphasizing that "the easiest to plate out the glass bottom". It should also be noted here that the brown eyes of the mud are only small to almost invisible, but in fact there are brown eyes. It is also incorrect to say that there are some “no brown eyes†on the market.
Xiao Bian believes that mud is the concept of individual business speculation, deliberately emphasizing oil density, is a misleading suggestion to novice player friends. Therefore, novices do not have to buy " mud " lobular rosewood when buying .
What is the mud ? The leaflet rosewood will be introduced here first. For more information, please pay attention to GO Jiaju.
Source: GO Jiaju
related articles
How about the price of Hedgehog rosewood furniture? Novice must see
Experts comment on the advantages and disadvantages of walnut furniture, a lot of dry goods can not be missed
Ming and Qing dynasty lobular rosewood furniture atlas, Tibetan friends must see must not miss
Experts reveal the maintenance method of lobular rosewood furniture, don't worry about maintenance!
What are the identification methods of lobular rosewood?
Sealand is a trustworthy manufacturer of Gas Mass Flow Meter, Gas Mass Flowmeter, Gas Flow Meter, Gas Flowmeter, Gas Meter, ATEX, IECEx & CE approved.
The installation is as follows.
1. Installation Steps
a) Choose correct installation site, taking installation area, pipeline, transmitter location &
valve location into consideration;
b) Install the meter according to direction mark on sensor;
c) Install the sensor & transmitter on pipeline;
d) Connect transmitter & sensor with 9-pin cable;
e) Start.
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Gas Mass Flow Meter, Gas Mass Flowmeter, Gas Flow Meter, Gas Flowmeter, Gas Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com