Now some of our sanitary wares have squatting pans, but everyone knows how to use this squatting device, but I do n’t know if there is any good way to solve them. Then don’t worry, let’s take a look at our decoration home network. How to give everyone a trick, how to do our squatting device, we must first know what the reasons for the squatting device are blocked, and then go to the targeted solution to solve the squatting device.
First, the cause of squatting
1. Improper design of the trap
The so-called trap, also called the anti-water bend, is a design to prevent the odor backflow of the sewer. Use the bend of the sewer to set a trap, and a certain amount of water in the trap will form a water seal to isolate the air under the sewer to prevent the odor from flowing backwards. Flushing is carried out by using water pressure. If the design of the trap is improper, such as excessive bending or sedimentation at the trap, the pressure will be insufficient, and flushing will not be carried out smoothly.
2, the caisson pool height is not enough
Another reason there is a situation squatting toilet is clogged, the bathroom is high enough caisson pool height is usually trap squatting pan is about 30 cm, height caisson if the pool is not enough, install shorter trap squatting pan It is prone to blockages.
3, improper installation
Squatting drainage is carried out through its own drain and sewer pipes, which are usually cleaned around the drain and drain before installation. The squatting of the squatting pan may also be caused by the fact that the dross of the sewer pipe and the sewage outlet is not cleaned.
Second, the squatting device blocking solution
1. Many times, the squatting pan is flushed with water, and it will pass through, especially for soil or paper, which can be dissolved or broken. If it is greasy, then open it with a pot of boiling water.
2. Generally, as long as there is no big foreign matter falling into the blockage pit, the blockage is not very serious. If there is water seepage, just use a large basin of water to quickly wash down and let the bigger water Under pressure, the blockage problem can be solved several times in succession.
3. When other items fall into the pit, when other items fall into the pit and cause the squatting device to clog, it is necessary to use some common tools at home. Mop is a good tool. Plug the mop head in the hole of the crater, then open the water valve to flood the mop, then press down on the mop, preferably into the mouth of the pipe, and then quickly lift the mop. In this way, the plug is sucked out and the squatting pan is used smoothly.
4. When the squatting pan is blocked, it is necessary to use some common tools at home. Mop is a good tool. Plug the mop head in the hole of the crater, then open the water valve to flood the mop, then press down on the mop, preferably into the mouth of the pipe, and then quickly lift the mop. In this way, the plug is sucked out and the squatting pan is used smoothly.
Our squatting pots are blocked. How can we do these methods? You can refer to the study, and our friends have learned through the content of the article that our squatting pans are blocked. In fact, there are key reasons why they are blocked. Next, everyone will continue to pay attention to our decoration home network to learn more about decoration.
Submersible Pump,Submersible Pump Adapter,Automatic Submersible Pump,Solar Submersible Pump
Hengshui Yuanhan Trading Co.,Ltd , https://www.yuanhanpump.com