Acceptance is an important link before the renovation. In addition to appraising the overall effect of the decoration, the acceptance mainly depends on whether the quality of the hand is satisfactory. Acceptance can be identified from the following seven aspects:
Dulux US Master Coatings (Western Chemicals)
1. The laying of lighting circuits shall comply with the regulations. Sockets, lighting switches, main gates, leakage switches, etc. shall have a certain height, kitchens, and air-conditioners shall be laid in dedicated lines. TV antennas and telephone lines shall be installed in positions convenient for maintenance.
2, the drainage should be smooth, no leakage, backflow and water phenomenon, high-grade water parts without clamping and scratch phenomenon.
3. The new masonry wall should be vertical, the bricks must have the same level, the joints should be even and tidy, the brick joints should not exceed 1mm, and the overall tile error should not exceed 0.8cm.
4. It is the overall production error of the plane ceiling that does not exceed 0.5, the crack between the board and the board does not exceed 0.3mm, and the error of the plastic ceiling does not exceed 0.5mm.
5, is the wood sealing line, corner line, waistline veneer meets the seam not exceeding 0.2mm, the line and the line mouth slot joint does not exceed 0.3mm, the veneer and the plate meets does not exceed 0.2mm, the sliding door entire surface error is not Beyond 0.3mm.
6, the paint should be smooth, feel good, no traces of cracks, within a meter no color and nail holes.
7, is the straight line of the wall surface, no significant sense of convexity and color within a meter, used to wipe without dust. The construction quality is related to the quality of the construction team; it is also related to the unit price of the construction project. The best way is to sign a contract between the two parties before the start of construction to clarify the decoration requirements and acceptance criteria.
Link: Talk about the decoration of the fall Note how to avoid the kitchen destructive decoration
Construction acceptance switch TV decoration socket paint lighting kitchen sliding door
Grinding head is a kind of small handle grinding tools, used in electric mills, hanging mills, hand electric drills. There are many kinds of diamond grinding head, ceramic grinding head, rubber grinding head, diamond grinding head, emery cloth grinding head.
Ceramic grinding head: grain size sand (generally brown corundum, white corundum, chrome corundum, silicon carbide) sintered by ceramic binder, with a metal handle in the center. Mainly grinding all kinds of metal, for grinding the inner wall of aperture, mold correction. Rubber grinding head: fine sand is synthesized by rubber binder for the polishing of mould
Diamond grinding head: A kind of stone material, ceramic materials and other non-metallic materials of grinding tools, especially involving a with diamond alloy grinding tools for grinding body, it includes substrate and a mill body, in which several mill body clearance to fixed to the substrate, the grinding surface of the grinding head grinding body also set a clearance, among them, the substrate is best by a certain toughness of adhesive materials, The grinding body is preferably made of diamond alloy material. The utility model has the advantages of high grinding performance, simple manufacturing and low cost, high grinding quality and being suitable for large-scale grinding
Grinding Heads,Cbn Sharpening Stone,Brazing Diamond Drilling Tool,Flexible Polyurethane Grinding Head
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com