| Home>Bearing knowledge>Analysis of the correct way to remove the bearing |
Analysis of the correct way to remove the bearing
Source: China Bearing Network Time: 2014-03-27
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1. In the process of using imported bearings; timing eradication is very important. How to properly remove imported bearings? First remove the imported bearing when viewing; first use the shooting and other methods to do a good job record. Others; to recognize the amount of lubricant remaining and sample the lubricant; then remove the bearing.
2. The removal of the bearing is divided into rough washing and fine washing; and the metal mesh frame can be placed on the bottom of the used container.
3. When rough washing; remove the grease or adhesive with a brush on the top of the oil. If you change the bearing in the oil at this moment, be careful to roll the surface due to foreign matter damage.
4, during fine washing; gradually change the bearing in the oil; must be carefully carried out.
5, the general use of the scavenger is neutral non-aqueous diesel or kerosene; sometimes also use warm lye, etc. as needed. No matter which type of scavenger is used; always filter and keep clean.
6, after eradication; immediately apply anti-rust oil or anti-rust grease on the imported bearings.
Recommend to friends comments close window
| Bearing related knowledge |
| Koyo bearing 3 large parts of the unloading bearing selection summary analysis coating skills: slewing bearing application field analysis of the smooth NSK bearing method to control the impact of bearing noise |
This article links to http://
Please indicate the bearing network http://
Previous:NSK bearing device method Next: Common equipment for bearing ring casting (1)
UV Birch Plywood,UV Prefinished Plywood,UV Coated Birch Plywood,UV Finished Birch Plywood
LINYI JIUHENG IMP&EXP CO.,LTD , https://www.jiuhengwood.com