The decoration of the wooden door is the top priority of the decoration, consumers must pay attention to the points when decorating the measurement, in order to ensure that nothing is lost.
1. Request the door opening to complete the vertical and non-tilt of the wall, and the thickness of the left and right walls is 1 and on one vertical end face. Otherwise, the door may be improperly installed or the seam between the line and the wall may be uneven and the size may be uneven.
2. The surveying personnel will refer to the corresponding rectification requirements according to the actual measured hole size. The banquet customer confirms the size of the product production and installation hole, and the customer implements the reconstruction work. Different series of doors have different structural sizes, and it is necessary to pay attention to the boundary position of different materials (floor and floor, floor and masonry bead position) when laying on the ground. Avoid the phenomenon that the ground of the door leaf is exposed to two different materials.
3. When the thickness, width or height of the customer's blank wall does not match the size of the scale when measuring, the customer's construction team needs to construct the finished product before the installation of the finished door. It can be restructured with sheet and masonry, similar to the addition/ Cut the wall, raise/lower the door, etc. Prevent the finished door from being helplessly installed.
4. If there is a height difference between the hall and the kitchen and toilet floor, the size of the ground should be determined with the surveyor during the measurement and marked on the measurement sheet to avoid errors during installation. It is emphasized here that the degree of decoration is the only reference standard for the size of the ground and the actual height of the hole. Therefore, the horizontal line of the decoration must be clearly and correctly marked when measuring.
5. The finished door is installed, and the mounting end of the sleeve and the opening must be installed with 10-25mm.
6. The ground crossing stone (also called the door stone) should be laid before the measurement. If the measurement is not completed, the size and method should be confirmed with the surveyor to avoid the dimensional deviation. It must be laid before installing the wooden door. Otherwise, the height of the door may be changed or the door gap may be too large.
7. After the customer or the designated agent has confirmed the signature of the measurement order and signed the sales contract, if there is a change in the size of the door opening, he should immediately contact the sales staff to carry out one more
For 1 measurement, the surveyor does not receive the customer's notice. By changing the request like this, the customer needs to sign and confirm. However, when the product enters the actual production and has been fixed, it will be reworked when the product needs to be reworked due to the size change.
8. Individually, the wooden door is the finished door. After the paint is finished, it cannot be easily modified at the installation site due to the change of the site. After the installation, if there is a slight gap between the sleeve and the wall, the on-site construction team needs to carry out the wall to close the wall. It needs to be glued like this, not in the scope of finished door installation.
9. 10 days before installation, the surveyor should decide whether to retest according to the situation, in order to confirm whether the size of the site opening has been rectified according to the requirements of the measurement sheet. If this is not the case, the installation period will be continuous. [ Follow the WeChat public account "Jiuzhengmen Window Network"; pay attention to courtesy, scan code to send millions of business opportunities! Jiuzhengmen window network exchange group ]
(1)Pruning shear is ideal for cutting stems,light branche,grass,flower thron and ect.
(2)Fully hardened, precision-ground steel blade stays shrill, even through heavy use. Handles have a nice pattern which makes the pruners easy to hold onto and there's a nice sound of the blades very precisely sliding past each other.
The hook is easy to use and very accessable, making one hand operations a breeze. The best thing about these is that they'll fit in your back pocket and stay locked.
(3)Low-friction coating helps blade glide through wood, prevents the blades from gumming up with sap and debris and helps the blades resist rust.
(4)Maximum cutting capacity: 3 inch diamater
Self-cleaning sap groove keeps the blade from sticking for easy operation.
Tape Measure Spring,Bending Tape Measure Spring,Small Bending Tape Measure Spring
Wintape Measuring Tape Company , https://www.wintapetapemeasure.com