Suitable for a variety of indexable turning tools that require more accurate calculation and measurement of tool length dimensions, tool tip height dimensions or tool tip to side base dimensions.
When calculating and measuring the above dimensions of the turning tool, the position of the reference point K shall be as specified in Figures 1 to 4.
1. Dimensions L, h1 and f are as specified in Figure 1.
figure 1
2. The position of the reference point K is as specified in Figures 2 to 4 for different lead angles kr and feed directions.
1) For an outer circle or a contour turning tool whose main angle kr is less than or equal to 90°, the position of the reference point K is as shown in Fig. 2.
figure 2
2) For the end turning tool with the main declination kr less than or equal to 90°, the position of the reference point K is as shown in Fig. 3.
image 3
3) For the outer circle, end face or contour turning tool with the main declination kr greater than 90°, the position of the reference point K is as shown in Fig. 4.
Figure 4
Concerned about surprises
Tag: turning tool reference point high speed cutting size measurement declination
Previous: Model representation of indexable external turning tool Next: Selection of commonly used machine clamp indexable turning blade
LED Grow panel include led grow light bar, Panel Grow Lamp, full spectrum led grow light works well for all plant growth, can replace sunshine light.
We can make red blue lighting and 4000k white lighting, many models panel grow light for you to choose.
Plant grow lamp is used in applications where there is no natural light or where supplementary light is required.
For example, in winter, when the possible hours of daylight may not be enough to achieve the desired plant growth.
Full Spectrum Panel,Panel Grow Lamp,Grow Light Bulb,Led Plant Light
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwygrow.com