Different materials outdoor furniture hardware maintenance

Outdoor furniture is different from ordinary indoor furniture. Because outdoor furniture is placed outdoors for a long time, it must have sun protection, waterproof and corrosion resistance. Although outdoor furniture has these characteristics, daily cleaning and maintenance are still indispensable. Because it is placed outdoors, the usual dust accumulation time will be agglomerated on the furniture, and the water will cause some areas to be wet for a long time, which will cause corrosion of furniture, especially furniture hardware. For example, stainless steel legs, cast iron legs, aluminum alloy legs, etc. in an outdoor table. Special attention should be paid to the metal parts of outdoor furniture.

Outdoor furniture is generally treated with special waterproof, sunscreen, anti-corrosion technology, and it will be much simpler to clean than ordinary furniture.

Aluminum alloy: If there is stain on the surface, wipe it with water. Do not use concentrated acid or alkaline cleaner.

Teslinbu: Wash directly with cloth and clean water.

Wooden table and chair: Wipe with a rag, do not scratch with a hard object, so as not to damage the waterproof layer on the surface.

PE rattan: PE rattan furniture can be cleaned with a soft brush, rag or vacuum cleaner. It should be protected from collisions and sharp edges or hard objects. PE vines can be protected from moisture, aging, insects and infrared rays, so you don't have to worry too much about maintenance.

Furniture materials: Because the material is soft, avoid collision with hard objects. Do not use metal brushes to prevent bumps and scratches. Ordinary detergents can be used as the cleaning agent. If cracks occur, they can be repaired by hot melt.

Furniture metal fittings: Prevents the surface of metal fittings from colliding and scratching when moving. Damage to the surface of metal fittings can affect their corrosion resistance. Do not stand on the folding furniture to avoid deformation of the folding part and affect the use. Simply scrub with warm soapy water and do not use strong acid or alkaline cleaner to avoid rusting the surface protection layer.

Tempered glass: Although tempered glass is harder than ordinary glass, it should also avoid collision with hard objects, especially at the corners of glass to prevent breakage and chipping due to collision. Do not use corrosive detergents to clean the glass surface, and do not use hard scrapers or metal cleaning brushes to clean the surface to prevent surface damage due to hard wiping.

Brass Nut

Copper nuts made of all kinds of embossed wire (usually lead brass, such as H59, 3604, 3602). Our daily contact with the embedded knurled copper nuts are processed by precision automatic lathes. The reference standard of embedded knurled copper nut comes from GB/T809, but the technical parameters of all kinds of embedded nuts produced by our company exceed the relevant indexes required by the national standard.

Knurling copper nut is mainly used for hardware Spring, shaped spring, craft gift spring, battery spring, spring antenna,key ring, phosphorus copper spring CNC automatic lathe turning parts (copper car parts, iron, aluminum car parts), metal stamping parts, electronic parts, iron shaft, single Rachel,Rachel, iron pin, non-standard Screw nut,fittings,fasteners, wire forming (wire card holder, Model aircraft landing gear, S hook, R latch, triangle buckle, D buckle) and other hardware products, belonging to the copper nut series.


Brass Nut,insert nut,knurled nut,injection nut,hex nut

Shenzhen Lanejoy Technology Co.,LTD , https://www.ccls-vaccine.com