Fire protective clothing is one of the protective clothing for firefighters. It is used by firefighters to protect themselves from chemical hazards or corrosiveness when they perform fire fighting and rescue operations on fire sites and accident sites where hazardous chemicals and corrosive materials are present. Protective clothing worn by materials.
The fire protective clothing body tape is made of flame-retardant thickened silk silk cloth, double-sidedly coated flame-retardant and chemical-resistant surface glue, and the main tape fabric only produces carbonized, insoluble droplets, and can maintain good strength in case of fire. The main body tape is made into a garment main body and a glove through a process of lamination-stitching-stitching, and is combined with a flame-retardant, voltage-resistant, puncture-resistant boots or fire-retardant rubber boots to form a complete garment.
First, use method
(1) Prerequisite to wear a chemical protective suit to be a co-wearer, first open the neck of the garment, chest, feet into the pants, lift the pants to the waist, and then put the arms into the two sleeves, and inside Sleeve loops over the thumb.
(2) After folding the top cloth chest cloth, pull it over the chest and cover it tightly, and then fasten the front chest.
(3) After tightening the belt, fasten the buckle.
(4) Take the fire mask and then cover the head with the hood and lift the big white buckle on the neck buckle.
(5) Finally wear gloves and press the inner sleeve into the glove.
(6) The co-consumer assists the wearer to wear a good breathing apparatus, and attaches the demand valve to the mask and activates the breathing apparatus in accordance with the requirements of the instruction manual of the breathing apparatus.
(7) Adjust the protective clothing to the most comfortable condition by adjusting the straps of the breathing apparatus. Remove any unused items from your chemical protective clothing.
Second, the use of matters needing attention
(1) Fire chemical protective clothing must not be in direct contact with flames and melts.
(2) The clothing must be carefully inspected for damage before use. If it is damaged, use is strictly prohibited.
(3) When used, care must be taken to ensure that the mask of the hood and the mask fit tightly, and that the buckle of the neck strap and chest must be fastened to ensure the airtightness of the neck and chest. The belt must be tightened to reduce the "bellows effect" during exercise.
(4) After each use, wash with soapy water or 0.5-1% aqueous sodium carbonate solution according to the dirty condition. Rinse with clean water, place in a cool, well-ventilated place and dry it.
Curtain Springs,Dog Leash Spiral Spring,Steel Ribbon Spring,Stainless Steel 301 Spiral Spring
Ningbo Yunsheng Elastic Components Co.,Ltd , https://www.yunshengsprings.com