Automatic glass doors can be seen everywhere in our lives. For example, at the entrance of a large supermarket, there are glass automatic doors at the entrance of the senior office buildings. With the glass automatic door also brought convenience to our lives, we do not have to push the sliding door by hand, it will automatically open in front of the glass automatic door. Then, how about the glass automatic door? How to install the glass automatic door? The following Xiao Bian will explain to you on these two issues.
How to open the glass door
The glass automatic door is a relatively special type of door leaf, because it is not a kind of solid door from its thickness, and it does not belong to a profiled door. The characteristics of glass automatic doors are determined by the characteristics of the glass itself. Such as: When installing the frosted glass door, it has semi-transmission function. If transparent tempered glass is installed, it has a transparent function. The working principle of the glass automatic door and the automatic door machine is similar, and the door opening signal is added on this structure, so that it can be configured as a simple automatic door system. Of course, the configuration of the glass automatic door also needs to be equipped according to the requirements of use, such as access control system, door open signal source, centralized control, and safety device. At this time, the auxiliary control device should be properly equipped according to the characteristics of the use of the building, the composition of the personnel passed, and the system requirements for building automation.
How to install glass automatic door
1. If the track of the glass automatic door is mounted on a welded iron frame, the overall frame material of the glass automatic door will use a square iron pipe with a thickness of 3 mm or more, or other stronger materials.
2. When installing the skeleton in the glass automatic door, it is necessary to ensure the level of its overall skeleton. It should be vertical, firm and close. The surface of the mounting rail must be smooth without burrs.
3. If it is installed on other attachments or on the load-bearing wall, ensure that the aluminum alloy track is horizontal and vertical after it is installed, and be firm. It is better to use a horizontal tube for horizontal position before using.
4. When installing the glass automatic door, one thing to note is that before installing the dynamo, the door body must be installed and adjusted. When installing the oscillating damper, it must be firmly attached to the ground so that it cannot be loosened for a long time.
The article concludes: If the glass automatic door is not installed, it is difficult for people to walk in front of the glass automatic door, so that the glass automatic door cannot open automatically, losing the significance of the glass automatic door. Therefore, if you want to install the glass door, you must set the range of the walking area and the range of the sensing area. By understanding the installation method of the above glass automatic doors, I believe that everyone will be more comfortable when installing glass automatic doors.
Petroleum Environmental Protection Equipment
Petroleum Environmental Protection Equipment,Oilfield Environmental Protection Equipment,Drilling Shaker,Oilfield Shakers
Hebei Yuanbai Technology Co., Ltd. , https://www.yuanbaikeji.com