Model NO.: HDPE5000S
Payment: T/T L/C
Delivery: Within 10 Days After Receiving
Grade: Injection Molding Grade
Trademark: Sinopec
Transport Package: 25kg/Bag
Specification: international standard
Origin: China
HS Code: 3901200090
Model NO.: HDPE5000S
Payment: T/T L/C
Delivery: Within 10 Days After Receiving
Grade: Injection Molding Grade
Trademark: Sinopec
Transport Package: 25kg/Bag
Specification: international standard
Origin: China
HS Code: 3901200090
1.Pictures





2. virgin hdpe granules Characteristic
This HDPE granulate is the extrusion, pipe grade with good weather resistance,good dispersion of black carbon also excellent resistance to rapid crack propagation resistance and slow crack growth performance.
3.Virgin & Recycled PE granules
1>. Blow molding grade,
Â
2>. Injection molding grade,
Â
3>. Film grade;
Â
4>. Extrusion grade.Â
4.Specification
Â
HDPE cable material Property |
Unit |
Typical Value |
Mass density |
g/cm³ |
0.941-0.959 |
Melt flow Rate(190 Centigrade /2.16kg) |
g/10min |
≤1.0 |
Tensile yield strength |
MPa |
≥19.0 |
Flexural modulus |
Mpa |
≥965 |
Elongation@Â break |
% |
≥400 |
Impact Embrittlement temperature |
Centigrade |
MAXÂ -118 |
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAXÂ 0.0001 |
1MHZ |
MAXÂ 0.0001 |
|
Volume resistivity |
 OHM-CM |
MINÂ 1x10Â 15 |






2. virgin hdpe granules Characteristic
This HDPE granulate is the extrusion, pipe grade with good weather resistance,good dispersion of black carbon also excellent resistance to rapid crack propagation resistance and slow crack growth performance.
3.Virgin & Recycled PE granules
1>. Blow molding grade,
Â
2>. Injection molding grade,
Â
3>. Film grade;
Â
4>. Extrusion grade.Â
4.Specification
Â
HDPE cable material Property |
Unit |
Typical Value |
Mass density |
g/cm³ |
0.941-0.959 |
Melt flow Rate(190 Centigrade /2.16kg) |
g/10min |
≤1.0 |
Tensile yield strength |
MPa |
≥19.0 |
Flexural modulus |
Mpa |
≥965 |
Elongation@Â break |
% |
≥400 |
Impact Embrittlement temperature |
Centigrade |
MAXÂ -118 |
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAXÂ 0.0001 |
1MHZ |
MAXÂ 0.0001 |
|
Volume resistivity |
 OHM-CM |
MINÂ 1x10Â 15 |
Silicon Manganese,Spheroidal Graphite Cast Iron ,Manganese Briquettes ,Ferro Manganese
Petroleum & Products Co., Ltd. , http://www.nbferro.com