How to correctly identify the "five ghosts" floor

With the changes in the international economic environment, the prices of domestic timber raw materials have soared and the production costs have continued to increase. The flooring industry is facing unprecedented cost pressures. In order to reduce costs, some companies use inferior products such as double-color plates, transfer plates, plywood, thin back plates, and short-lived plates to pretend to be good plates to meet consumers' needs. These plates are called "Five Ghosts" in the industry. How can consumers avoid these "five ghosts" when they buy? How can we distinguish the surface and internal gaps of the "five ghosts"? The following Xiao Bian gave you one by one.

First, revealing the poor quality of the wooden floorboards

Take the wood sapwood and core material transfer part of the solid wood substrate, the floor surface through the use of color or special color modification treatment, eliminate the color difference between the sapwood and the core material, in order to act as a high-quality solid wood flooring sales deceive consumers. Because the air-dry density, moisture content, and wood hardness of the sapwood and the core material are different, a series of quality problems such as arching, deformation, and cracking of the floor easily occur.

Identification method: sanding the floor surface or sawing the floor to see the end face will show a very serious color.

Second, the secret wood floor tricky patch panels mosaic environmental protection

With some tailings, under the board and different lengths of solid wood floor panels spliced ​​by fingering process, and serve as sales of pure solid wood floor, deceive consumers. This kind of floor is spliced ​​with a large amount of adhesive glue, and the content of formaldehyde is not high, and it is easy to cause deformation and cracking due to uneven stress in the floor.

Identification method: longitudinal sawing or grinding visible finger joint marks.

Third, the secret wood floor tricky panels to shoddy

A solid wood veneer with a thickness of 0.05mm-2mm is attached to a poor quality solid wood substrate to defraud consumers of the sale of pure solid wood flooring. This type of floor is not stable due to the use of poor quality substrates, and the use of adhesives to bind veneer and poor quality wood together can easily cause delamination of the veneer and the substrate, and there is a certain amount of formaldehyde that is not environmentally friendly.

Identification method: can be identified by comparing the observation of the floor surface and bottom surface, solid wood floor surface and bottom of the wood grain is basically the same, but the plywood is completely different.

Four, Secret wood floor greasy transfer printing wood grain is not natural

The use of wood processing with defects such as wormholes, variegated spots, cracks, etc. to defraud consumers of the sale of solid wood flooring. The transfer board is mostly made of inferior grade B wood as the base material, the floor quality is not stable, the wood grain is not natural, and the laminate flooring is similar, and at the same time, the paint surface is easy to fall off and crack due to less paint coating processes.

Identification method: can be identified through the surface of the wood, solid wood flooring natural wood grain, transfer board surface wood grain are the same, basically no color, the back and front of the wood is completely different.

V. Secret wood floor stinking short-lived board technology is not up to standard

Wood flooring is a kind of modern industrial product with high production technology and certain technical content. Some companies, due to their own conditions, cannot achieve national standards in terms of paint adhesion, surface hardness, etc., especially if the moisture content is not strictly controlled, resulting in deformation and lacquer in a very short period of time after floor coverings are installed. The surface is peeled off and the surface is not scratch resistant.

Identification method: The results can be obtained through the evaluation of the on-site wooden floor.

Consumers only need to keep three things in mind when buying a wood floor to avoid the “Five Ghost” board intrusion:

First, it is necessary to use large brands of flooring as much as possible, and the production and management of big brands is more standardized.

Second, do not try to be cheap for a while.

As the saying goes: “One price for one product.” When there is a big difference between the price of a flooring product and the market price, consumers must maintain rational consumption.

Third, we must carefully observe the characteristics of the product, contrast the texture or saw the floor to see the inner quality.

The brand floor has relatively strong operating strength, good after-sales service, professional installation team, and reliable quality products. As the saying goes, the government and the society have greater supervision, and generally do not falsify and will maintain their good reputation. The five inferior floors (strange board, short-lived board, crisp board, Li Gui board, workshop board) now account for 30% of the market share, which generally follow the trend, can only be imitated production, although claims and brand-name flooring quality Different, but in fact these inferior brands are not the slightest guarantee of quality, not to mention after-sales service, they generally hit a * for a place, or change the name and then sell, so that consumers are at a loss, become the culprit of health problems.