Nowadays, in the renovation of new houses, many people will choose to lay laminate flooring at home, which is not only beautiful, but if there are old people and children in their homes, they will be even more secure and therefore they are favored by the majority of consumers. So how do you install laminate flooring ? Today, let us talk about the next 10 steps to install laminate flooring.
How to install composite flooring - preparation
1, clean the ground 
In the area where wood flooring is to be prepared, do a good job of cleaning and ensure that there is no dust in every corner of the room.
2, ground leveling 
One of the most important steps before laying wood flooring is leveling. If the ground is uneven, wood floors are directly laid, and the problem of warping is very likely to occur in the later period. When leveling, it should be noted that the horizontal error should be controlled within 2mm.
3, floor treatment 
Since the size of the floors purchased is uniform, and the floor is laid in different ways, resulting in different sizes required, the composite floor must be cut according to the space requirements.
4, reserve baseboard position 
Before the construction, the position of the baseboard must be reserved first. Usually, the equal thickness template is placed on the baseboard.
How to install the composite floor - floor shop, baseboard installation
5, floor stitching 
When splicing the wooden floor, it is necessary to align it and flatten it so as to ensure no gaps between the floors. According to this procedure, it is sufficient to cover the entire room.
6, measuring the length of the baseboard 
Since the baseboard has a fixed length, and the length of the baseboard used in each room area is not equal, it is necessary to measure the length required in each place so as to avoid later troubles.
7, baseboard cutting 
General construction workers will have such props: tape measures, pencils, saw teeth, etc. After determining the length of the baseboard required for the area, cut it.
8, baseboard installation 
In the past, wood flooring was used as a wooden block of the same size as the baseboard. Then you can remove it and then insert the skirting board into the reserved gap.
9, baseboard connector processing 
Here is the need for certain techniques. When cutting the skirting board, it is necessary to make the two ends "commensurate" in shape so that it is convenient to connect the two different baseboards together.
10, fixed baseboard 
The final step is to fix the baseboard and fix the floor nails to the baseboard so that it can be fixed with the wall and it is not easy to loosen.
Xiaobian conclusion: For the installation of composite flooring , after reading these 11 steps, should be able to learn it. Before laying wooden floors, we must ensure the cleanliness of the ground and the flatness of the ground, so as to avoid refitting after loading, it is not only time to waste.
Expanded metal is sometimes considered an alternative to sheet metal or wire mesh. It combines some of the best features of both-providing a material that is stronger than thin wire mesh and has better air flow and drainage than sheet metal.
Expanded Metal Mesh,Element Expanded Metal Mesh,Aluminum Expanded Metal Mesh,Ss Standard Expanded Metal Mesh
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , http://www.kayigrating.com