First, the waterproof layer should extend from the ground to the wall, 250mm above the ground. The height of the waterproof layer on the bathroom wall should not be less than 1800mm.
2. After the completion of the waterproofing project, a 24-hour storage test must be done.
Third, the power cord and the telephone line or network cable must not penetrate the same line tube. The horizontal distance between the power cord and socket and TV line and socket should not be less than 500mm.
4. A waterproof socket shall be installed in the toilet room and the switch shall be installed on the wall on the open side of the door.
5. Lines laid on the chisel wall or on the ceiling must be equipped with a sheath pipe. It is forbidden to directly bury the conductor in the plaster layer. The conductor shall not have joints and kinks in the pipe, and there shall be no exposed conductor in the ceiling.
Sixth, the general socket uses 2.5mm2 section and must design the grounding line, the air conditioner, the water heater and so on uses 4.0mm2 section.
TV space effect map outlet space bathroom switch home fashion small family
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysoncool.com