Ming and Qing mahogany furniture, how to choose the correct way to buy furniture?

Home decoration, furniture is the most important step, building materials market, burning money, time-consuming and laborious. But often after staying in a new house for a period of time, furniture will have various problems such as cracking, paint, etc. Let us take a look at todayâ€™s decoration mastersâ€™ views on these situations.

Misunderstanding 1: Normal deformation and cracking of wooden furniture
Dry shrinkage and shrinkage of wood are problems, but the production process is in place, the wood is properly dried and the seam is suitable. In the production process of solid wood furniture, the most important process is the wood drying process. The degree of drying is not enough to make the furniture easy to crack and deform, otherwise it will not produce too many cracks and deformations.

Misconception 2: The heavier the wood, the harder it is and the more stable it is.

Wood density is more stable This statement is wrong. The stability is good, Nanmu teak wood, density is not high, but the quality is better, so the quality and density are not directly proportional. In other words, mahogany is a good wood, not only its high density, but also the delicate texture of the pattern and wood.

Misunderstanding 3: Solid wood furniture is more environmentally friendly
Many people believe that solid wood furniture is a natural material and wood-based panels contain formaldehyde, so solid wood is more environmentally friendly. In fact, it is not that solid wood furniture requires a lot of wood, but it has high utilization rate of man-made boards, high production efficiency, low cost, and is not easily deformed. Therefore, the destruction of the environment by solid wood furniture is greater than that of wood-based panels.

Misconception 4: The South and North homes are different
The relative humidity in the Northland varies greatly, and the deformation of wood furniture is normal. The expansion and contraction of wood is the essence of wood. However, before the production of furniture, the wood needs to be dried to meet the corresponding standards. When the corresponding technical standards are reached, it is difficult to deform the wooden furniture.

Finally write a word: When buying solid wood furniture, we must first understand their own knowledge, so as not to be fooled. Choose the best item for yourself.

How to purchase furniture correctly
Should pay attention to the following points:

1. In general, when furniture is purchased, we should consider the coordination between the color of the furniture and the interior background. We can use the indoor background color and lighting as the main direction. For example, if the background color of the room is thick, it is not appropriate to choose dark-tone furniture, because the deep shade furniture will feel heavy in the background and absorb light, making the interior atmosphere heavy and dark. In addition, if the furniture color is too thick, it does not look good, it is easy to have the effect of visual fatigue.

2. Coordination with the ground
Choosing furniture in the room is relatively easy. If it is terrazzo or marble flooring, it is not suitable for selecting steel. This will increase the cold air in the room.

It is recommended to use wooden furniture to increase the interior parts and reduce the cold and hard feeling.

3. When the veneer is veneer, strict, smooth, no glue and degumming are required.

4. The film of the furniture should be smooth and bright, and the color of the unit or set of products should be similar. The surface of the product should not be wrinkled, sticky or leak paint, and the interior of the product and other non-painted parts should be kept clean.

5. The strong odor of furniture cannot be purchased. Opening and opening cabinets, if there is a strong irritating odor, indicates that the formaldehyde content is exceeding the standard.

6, do not rush into the living room, buy new furniture, it is best placed in an empty room, so that the release of harmful gases in furniture as soon as possible, and then for some time.

7, pay attention to check the board surface is not insect moth, cabinet doors, hands, etc. are solid, the drawer is qualified.

TORICH is focusing on Honed Tube manufacturing and exporting,

ID Honed Tube

seamless honed tube where the surface is honed or skiving roller burnish, and the tubes are stress relieved and annealed if it is necessary.

The Steel Tubes are produced according to technical standard of

EN10305-1 Cold Drawn Seamless Steeel Tubes

EN10305-2 Cold Drawn Welded Precision Steel Tubes

Seamless and Welded DOM tubing are produced by material of E155,E195,E235,E275,E355 +C +LC +SR +A +N

DOM is a process that is applied to tubing after it is initially constructed.

It is referred to as Seamless ,It can be said that do seamless process method on ERW tubes,

So the tubes will have a high strength ,high quality.

DOM tubing is commonly use in auto parts and machinery parts, also for heavy engineering industry.

Big Diameter Honed Tube, Skiving Roller Burnished Tube, max ID 650mm, max length 12000mm