Smooth method of roll NSK bearing

Source: China Bearing Network Time: 2018-05-29

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The smoothness of the NSK bearing of the smoothing method is in principle fundamentally the same as the smoothness of other rolling NSK bearings; only the operating conditions of the NSK bearing of the roller are relatively poor; whether the operation function can be usefully developed depends largely on the smooth condition of the NSK bearing.
The smooth method used for the roller NSK bearing is mainly grease smooth and oil smooth.
The smooth and smooth grease has a sealing effect; the sealing layout and smooth equipment are simple; the smooth grease is convenient; therefore, only the working conditions are required; the roller NSK bearing is usually made of grease smooth.
The oil has a smooth cooling effect and can remove dirt and moisture from the NSK bearing. The roller NSK bearing uses a smooth and smooth oil method with smooth oil supply, smooth fuel injection, smooth oil mist and smooth oil and gas.
Smooth pressure supply is the most useful smoothing method for roller NSK bearings under conventional speed.
Smooth injection is to smooth the smooth oil through a nozzle mounted on the NSK bearing side into the NSK bearing for smoothing; usually used in high-speed roll NSK bearings; perhaps the pressure supply is smooth and can not meet the cooling needs.
Smooth spray is to spray the dry compressed air rich in oil mist to the inside of NSK bearing for smoothing; the oil consumption is small; because of the action of air; the cooling effect is extremely strong; it is mainly used for large rolls with high rolling speed and high rolling precision. NSK bearings; perhaps used for NSK bearings that are not often disassembled in NSK bearing housings.
Smooth oil supply and smooth injection require the installation of inlet and outlet pipes, smooth pumps, and oil reservoirs; sometimes smooth oil coolers are required; therefore; the cost is high; usually NSK bearings are less used.

Recommend to friends comments close window

Bearing related knowledge

Analysis of the causes of corrosion of engineering plastic bearings and painful bearings and the ways to avoid disassembling the oscillating motor bearing
SKF double row deep groove ball bearing introduction and recognition of the sound of imported bearing tumbling

This article links to http://
Please indicate the bearing network http://

Previous: Internal clearance and preload of rolling mill bearings Next: SKF bearing type accuracy grade

Cap is mainly used for welding on a pipe end to cover pipe end.Pipe caps Production process: hot forming.

Steel Pipe Cap belonging to steel pipeline products,material can be divided into Carbon Steel Pipe Cap, alloy steel cap, stainless steel cap. Welded on the pipe end or threaded cap on the thread pipe end to cover plugging the tube. For closing the pipeline, the role of the same plugs. same to the role of Blind Flange, but blind are removable , welded cap is not removable. Cap including convex cap, cone shell, adjustable sections, flat lid and tighten port design. Production process is the thermoforming.

Product Name:Pipe Cap

Size:DN10-DN2500

Materials: A234 WBP-WP1-WP12-WP11, A403 WP 304-304L-316-316L, A402 WPL3-WPL 6,A860 WPHY 42-46-52-60-65-70,PG370,C20

Thickness: 2mm-100mm

Standard:GB/ANSI/ GOST/ JIS/ DIN

Crafts: Cold extrusion, Thermoforming.

Connection: Welding

Package: Wooden boxes,Wooden pallets,According to customer requirements.

Brand Name: HY

Place of Origin: China (Mainland)

Certification: ISO.UKS.SGS.BV

Application: Chemical, Water, Oil and gas, Electricity