Firefighters' chemical protective clothing is divided into fire fighting suits, fire escape clothing, fire insulation clothing, and firefighters heavy protective clothing. It is a protective clothing worn by firefighters to protect themselves from chemical dangerous goods or corrosive substances when they perform fire fighting and emergency rescue on fire sites and accident sites where hazardous chemicals and corrosive substances are present.
Fire protective clothing adopts flame-retardant silk cloth, double-coated flame-retardant and chemical-resistant surface glue, and is made of adhesive tape that can produce carbonization in case of fire, does not produce dripping, and can maintain good strength as main material. The garment body and the glove are made by the splicing-stitching-striping process and are combined with a flame-retardant, chemical-proof, voltage-resistant and anti-puncture-proof boot.
Precautions
1. Heavy chemical protective clothing must not be in direct contact with flames and melts.
2. Before use, the clothing must be carefully inspected for damage. If it is damaged, use is strictly prohibited.
3. When using heavy-duty chemical protective clothing, care must be taken to ensure that the masks of the hood and the mask are in close cooperation. The buckles on the neck buckles and chests must be fastened to ensure that the neck and chest are airtight.
4. After each use, wash with soapy water or sodium carbonate solution according to the dirty condition, then rinse with fresh water, place in a cool and ventilated place, and then dry it and pack it.
5. When folding, put the hood opening up on the ground. Fold back the hood, neck strap and two sleeves, and then fold the garment vertically, overlap left and right, the two boots point outward, put the gloves in the middle, soles Relatively rolled into a roll, horizontally placed in heavy chemical protective clothing bags.
6. Heavy-duty chemical protective clothing is strictly prohibited from exposure to heat and sunlight during storage, and must not be exposed to active chemical substances and various oils.
soap rack,soap holder,soap stand,stainless steel soap holder,steel wire soap stand,etc.Let your bathroom become more simple and upscale!Applicable to families, hotels, home stay and other places to use.
304 stainless steel never rust, will easy to clear, it's also very durable!
we are 15 year factory, we had big engineer team, and strong production line, can give you good serve and quanlity. Welcome to cooperation!
soap rack,soap stand,soap holder,soap dish,soap dish rack
Shenzhen Lanejoy Technology Co.,LTD , https://www.injectionnut.com