- Stair maintenance knowledge
1. After the stairs are installed, check the overall installation status and use the stairs before installing the standard.
2. When cleaning the stair steel, please wipe it with a dry soft cloth and do not rinse with water.
3. When cleaning the stairs, please use a vacuum cleaner or a wrung rag to remove dust. Do not rinse with water.
4. If the water is accidentally spilled on the stairs, it should be dried in time.
5. If there are special stains on the step, please wipe it with gentle neutral cleaning and warm water. Do not use steel balls, acid and alkali to clean.
6. Never sand the stairs with sandpaper. 7. When moving articles upstairs, take care to prevent the surface of the hardware from scratching the surface of the stairs.
8. It is recommended to place a foot pad on the stairway to reduce the abrasion of the sand.
Ways to remove stains from the stairs surface:
A. Asphalt, rubber, petroleum, chocolate, shoe polish, etc., can be cleaned with gasoline, liquor or the same solvent.
B. Chalk, crayons and lipsticks can be cleaned with alcohol.
C. Wax, chewing gum, we can put a piece of plastic film on the stain, and then carefully scrape off.
Stairs should be protected from moisture, fire and impact
Regardless of wooden stairs or steel stairs, wrought iron stairs, etc., pay attention to moisture, fire and impact during use.
1. The wooden stairs are damp, and the wooden components are easily deformed, cracked, and the paint will fall off. Metal stairs also have wooden components, and the metal will rust when wet, so the daily cleaning of the stairs can not be scrubbed with a large amount of water, sprayed on the surface with a cleaning agent and then wiped with a soft cloth.
2. The parts that are often in contact with people, such as the handrails, have a short life span compared to other components, so they should be regularly protected with special wax or floor wax. In addition, although the paint surface of some tread plates is a light-curing wear-resistant paint, the wear resistance is relatively speaking, and it has a certain service life in itself. In order to avoid local severe wear after the wooden tread plate has been used for a period of time, a carpet can be laid on the center of the stairway corridor. The brightness is chosen by the owner himself or by a professional designer. This not only protects the stairs, but also embodies the entire space to some extent.
3. Always check the joints of the parts to prevent loosening or pest erosion. Because the stairs have been installed, although the engineers have connected them tightly, each component is undergoing subtle physical changes as the temperature and humidity are constantly changing. Wooden stairs or components made of metal or other materials are often damaged by collapse, abrasion, insects or fungi, which can be repaired by professionals. But more important is the front maintenance, proper maintenance can greatly extend the life of the stairs.
4. If it is inadvertently soaked in water, it should be dried as soon as possible after discovery and allowed to dry naturally. It is strictly forbidden to use electric heater to dry or expose to sunlight.
Xi'an Jmlai Bio-Tech Co., Ltd. , https://www.jmlaisarms.com