After using the bathroom for a period of time, many household owners will find leaks in the wall of the bathroom. Over time, the tiles on the wall begin to loosen, and the painted parts on the top surface are also mildewed and black, which seriously affects the aesthetics of the bathroom. How to solve this kind of water leakage? Look for the solution below.
Knowing the roots to find out the cause of water leakage on the wall
There are two kinds of water leakage in the bathroom wall. One is caused by water leakage, and the other is caused by water leakage. Therefore, when solving the problem of water leakage in the bathroom wall, it is necessary to distinguish what causes the water leakage.
Judging the water pipe problem: First, look at the water pipe according to the construction drawing. If there is a water pipe behind the leaking position, you can turn off the water sluice inside the house when you are traveling or not at home, and clear the water inside the faucet, if after a while It was found that the water marks on the wall were gone, which proved that there was a problem with the water pipes.
Judging the problem of waterproof layer: After the shower, the wall on the back surface of the bathroom leaked, and after a period of time, the water leakage of the wall was improved, which proved that there was a problem with the waterproof layer.
Ingeniously solve the problem of knowing the disease
After finding the cause of water leakage in the bathroom wall, it is necessary to find a solution to the problem. The water leakage caused by the water pipe needs to find the water leakage point of the water pipe. If it is caused by the waterproof layer, the leakage position of the waterproof layer must be found, and the waterproof layer should be repaired. .
Water leakage: If there is water leakage in the water pipe, you need to plan the wall brick, then find the joint of the water pipe, check whether the water pipe is leaking, find the water leakage point, replace the water pipe or the interface, and finally lay the wall and re-waterproof. Restore the tile surface.
Leakage of the waterproof layer: If the waterproof layer leaks, it is necessary to shovel the surface tile, find the gap between the tiles, smooth it with a waterproof plug, and then apply a waterproof coating on the wall. If the water is leaking due to insufficient waterproof height, it is necessary to re-plan the high-level tiles, re-waterproof the high-walled walls, and then lay the tiles.
Ground leaking water inspection to find a solution
In addition to leakage on the wall, water leakage on the ground often occurs. Although the water leakage on the ground does not directly affect the home, it has a great impact on the residents downstairs, which affects the neighborhood and once the ground is leaked. Need to be dealt with in a timely manner.
Judging water leakage: First of all, it is necessary to judge the main cause of water leakage on the ground. In the bathroom, the water shut-off test is carried out, and the water is placed at a height of 3 cm. In the process of closing the water, the floor of the downstairs household is leaked. If the water leakage is serious, it proves to be a waterproof layer. There was a problem; if there was no change after the water was closed, it proved that there was a problem with the water pipe.
Water pipe leakage solution: For the ground pipe and hot and cold water pipe leakage, the floor tile should be first opened, and the pipe joint should be found for sealing treatment. If there is a crack in the water pipe itself, the water pipe needs to be replaced. After the treatment, the water pipe is re-dark. Buried, repaired the waterproof layer within the scope, and restore the floor tiles.
Waterproof layer leakage solution: If there is a problem with the waterproof layer on the ground, you need to shovel the floor tiles, find the faulty waterproof layer, and then seal it with a leaking treasure or water stop strip, then carry out waterproof construction, if the leaking point is near the wall Body, you need to shovel the façade tiles together, the waterproof layer should also be done on the wall surface, after the treatment is completed, the water shut-off test, after re-laying the tiles.
The waterproof problem of bathroom space has always been the main problem of home improvement construction. Whether it is because of water pipes or waterproof layer, water leakage is difficult to find. Many households are too lazy to deal with it, eventually affecting wall structure and ceramic tiles. In order to leak water, we must first find the cause, whether it is the reason of the water pipe or the waterproof layer, and then correct the problem.
Aluminium Alloy Large Door Handle
Sliding door handle,Swing door handle,Large door handle
BOGO HARDWARE & FITTING CO.,LTD , https://www.bogohardware.com