The steam reciprocating pump is a kind of pumping equipment that uses steam as the driving force and functions according to the principle of the pump. It is mainly used for supplying water to small and medium-sized boilers, petroleum products from oil refineries, and mine drainage. A variety of steam reciprocating pump cylinder working pressure 1.4Mpa, discharge pressure 1.7Mpa, suitable for saturated steam and superheated steam, the temperature does not exceed 200 ℃. All kinds of steam reciprocating pump with water tank piston ring, only for water temperature can not exceed 60 ° C, in excess of the temperature below 105 ° C, to be replaced by high-quality canvas sandwich packing system to choose the water tank piston ring. Various steam reciprocating pump theoretical suction is 10.3 meters, but the actual use of suction head, including pipe resistance, should not exceed 7 meters, when suction hot water suction head decreases with increasing water temperature, if the water temperature is too high Or pipeline resistance is too large, the lowest water level into the pool to be higher than the cylinder steam cylinder, water tank straight centerline.
Sheet Metal Parts,Stamping Steel Parts,Prince Metal Stampings,Drawings Of Metal Stamping Parts
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.jstongdetrade.com