Say kitchen decoration is not easy, mainly because of the particularity of the kitchen, not only practical appearance is not to say, there is one point is very important, is to be safe, if the circuit is installed unreasonably, it is easy to cause hidden dangers, therefore, in the kitchen renovation It is important to make sure that the circuit will be transformed.
First, safety articles
1, socket, lighting branch walk
Sockets should be grounded to ensure the safety of electricity. There are 3 wires in total, and the lighting system does not need to set the ground wire. There are only 2 wires. Therefore, it is better to separate the two routes and not to disturb the connection. Even if the circuit is in trouble, it is easy to maintain. .
2, switch socket away from the sink cooker
If the kitchen switch and socket are close to the cooker, the higher temperature can accelerate the aging of the circuit; and the distance between the kitchen switch and the socket should be far away from the sink to prevent electric leakage accidents due to moisture. Water purifiers, kitchen waste disposers, etc. are usually installed under sink cabinets. It's best to place power switches and sockets next to sink cabinets. Use waterproof switches and sockets to prevent leakage due to moisture.
3, the outlet must have a protective door
The kitchen uses a socket with a protective door. Double-hole plugs with protective doors must be inserted into the two holes at the same time in order to be energized. After the three-hole plugs must be connected to the ground, the other two pins can be plugged in. This design prevents children from getting an electric shock due to their curiosity, with a finger or small metal plate, iron needles, and other electrical conductors protruding into the jacks. Some households feel that they are too tall and unsightly when installing the socket. They will be installed in a lower concealed position. However, it is easy for water to splash into the socket. Therefore, the kitchen socket is preferably 30 cm above the countertop.
Second, practical articles
1, the use of separate feeder refrigerator
The refrigerator can only save energy at a stable voltage. If it shares a branch line with other electric appliances, the opening and closing of different electric appliances will cause a sudden change in the instantaneous current, which will cause voltage fluctuations and interfere with the normal operation of the refrigerator. With the use of separate feeders, the owner can turn off other power supplies while on a business trip, leaving only the refrigerator's power supply. This is safe and ensures that the food in the refrigerator does not deteriorate. In the kitchen, range hoods, sterilizers, electric ovens and other high-power electrical outlets must also ensure that dedicated independent feeders are used.
2, as many as possible to leave the socket
Now there are a wide variety of small household appliances in the kitchen. Rice cookers, juicers, induction cookers, ovens, range hoods, and sterilizers are all used in sockets. Think of a good location before renovating and leave a few spare outlets to adapt to your needs.
3, set up the distribution box in the kitchen
In the kitchen, microwave ovens, induction cookers and many other high-power appliances are used, and the current during operation is large. The kitchen shall be provided with a distribution box and the wires shall be taken out of the box to avoid a short circuit in the circuit and be implicated in the full set of circuits in the house. This can also ensure that when the kitchen circuit is repaired, only a partial circuit can be turned off without closing the mains power supply.
The more detailed the division of labor in kitchen appliances, the more sockets need to be reserved for kitchen renovation. Leave the power outlet in a different position for use in kitchen equipment added in the future.
Third, beautiful articles
1, avoid outlet positioning is not allowed
The cabinet is a large item in the kitchen. The circuit transformation should be synchronized with the overall cabinet design. The socket must be accurately positioned to centimeters to prevent the socket from being blocked by the cabinet and affect its use.
2, to avoid the exposed hood outlet exposed
The socket of the cooker hood is fixed, it can be installed in the middle of the flue, and it is blocked by the hood to keep it clean and beautiful. If you want to control the hood switch, you can set an additional switch on the countertop.
3, to avoid the wire coiled into a "spider net"
The outlets on the front of the kitchen cabinet are too concentrated and all appliances can only be concentrated in a narrow area. After the plug is connected to the socket, various wires are intertwined to form an unsafe “spider webâ€. It is neither beautiful nor safe. It is best to use two sockets as a group. Each group of sockets should be kept at a distance of about 40 centimeters, so that the electrical equipment can keep the distance and the wires are relatively neat.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Kitchen kitchen decoration
High Bay Light,High Bay Lamp,Highbay Light With Sensor,Outdoor High Bay Light
Fuonce-Lighting , https://www.fuoncelighting.com