First, water quality coating mix 1 white cement slurry: 80 (white cement): 17 (107 glue): 3 (toner).
2 lime slurry:
Clean oil usage = block lime usage × (1 + loss rate) × 30% (clear oil ratio)
Toner usage = block lime usage / [1% - 5% (toner ratio)] - block lime usage Note: The clear oil content accounts for 30% of the total lime content; the amount of toner added is the total amount of lime used 5%.
3 The lime slurry should be added with industrial salt, and the amount should be 1% to 3% of the amount of lime used:
The amount of salt used = the amount of lime used / [1 - (1% ~ 3%) of the amount of salt] - the amount of lime used 4 large white pulp was added carboxymethyl cellulose 2.1%, toner 3.34%.
5 Red soil sirup: 85 (red clay): 15 (blood).
6 Cement slurry: 77 (cement): 80 (latex paint): 20 (water).
7 Corkable silver paste: 78 (silverable): 20 (great white powder): 2 (carboxymethyl cellulose).
8 internal latex paint: 80 (latex paint): 20 (water)
9 External latex paint: 100% (latex paint).
Second, paint, putty mix.
1Gypsum putty:
Gypsum plaster putty (for doors and windows): 1 (cooked tung oil): 1 (gypsum powder), water amount;
Gypsum plaster putty (for the floor): 1 (cooked tung oil): 1.5 (gypsum powder), water amount;
Wipe to find the gypsum putty: 1 (cooked tung oil): 2 (gypsum powder), water amount.
2 Run oil: 60 (big white): 20 (turpentine): 8 (reconstruction paint): 7 (clean oil): 5 (cooked tung oil)
3 Run powder: 90 (big white): 7 (toner): 3 (bone glue)
4 paint putty: 1 (paint): 4 (alcohol): 2.5 (gypsum powder): (Toner accounted for 5% of gypsum powder).
5 Timber base oil: 15 (mature tung oil): 15 (clean oil): 7O (dissolved oil).
6 colors: 60% (light color): 20% (medium color): 20% (dark color).
7 oil color: 1O (hue and paint): 1O (varnish): lO (clean oil): 70% (solvent oil).
8 wear back:
Alkyd varnish wear back: separately add alkyd thinner 15% ~ 20%;
Brush paint film: 17.25 (paint): 82.75;
Brush nitro lacquer: 1 (nitro lacquer): l ~ 4 (nitro paint thinner).
9 novolak: 90 (magnetization): l0 (alkyd).
10 phenolic enamel: 90 (magnetic paint): 1O (alkydial thinner).
(11) Polyurethane paint: 90 (fat paint): 1O (xylene).
(12) Peroxyethylene survived five times:
Primer: 77 (primer): 23 (peroxyethylene diluent);
Magnetic paint: 80 (magnetic paint): 20 (ethylene peroxide thinner);
Varnish: 80 (varnish): 20 (ethylene peroxide diluent).
Third, the metal surface paint mix.
1 Blend paint: 95 (coating paint): 5 (paint solvent oil).
2 alkyd enamel: 95 (magnetic paint): 5 (alkydial thinner).
3 peroxyethylene five times survival:
Primer: 77 (primer): 23 (peroxyethylene diluent);
Magnetic paint: 80 (magnetic paint): 20 (ethylene peroxide thinner);
Clear varnish blue 80 (varnish): 20 (ethylene peroxide thinner).
4 Asphalt paint: 45 (petroleum pitch): 50 (paint solvent oil): 5 (clean oil).
5 red anti-rust paint: 95 (red anti-rust paint): 5 (paint solvent oil).
6 Phosphating primer: 90 (phosphorized primer): 7.5 (ethanol): 2.5 (butanol).
7 Zinc yellow primer: 90 (zinc yellow primer): lO (alkyd paint thinner).
Fourth, plastering paint mix.
1 PuTTY putty: 88 (Large): 2 (Carboxymethylcellulose): lO (polynitrile nitrile emulsion).
2 batches of putty: 88 (talc): 2 (carboxymethyl cellulose): 1O (polynitrile nitrile emulsion).
3 wipe to find the gypsum putty: 1 (cooked tung oil): 1.5 (gypsum powder).
4 Primer: 20 (cooked tung oil): 20 (clean oil): 60 (paint solvent oil).
5 Blend paint: 100%.
6 Light-free tempering paint: 90 (conforming paint): 1O (paint solvent oil).
7 matt paint finish: 95 (coating paint): 5 (paint solvent oil).
Fifth, other materials.
1 Paint solvent oil (diluent): Use auxiliary solvent oil for brushing, hand rubbing, etc., take 5% of the total amount of oil-based paint, and take 10% of the total amount of other paints.
2 Alcohol (antifreeze): Take 2% of gypsum powder in plaster putty.
3 Drier: According to 1.7% of the total amount of paint, the mature tung oil used in the gypsum putty is also added 1.7%.
4 paint tablets alcohol: wood stains and asphalt and other stain processing points, section use.
5 pumice powder: friction film and brown eye.
6 Wax: Sand wax and polishing wax add 10% of kerosene.
7 Paraffin: Solvent oil 3% (for wax putty use).
8 floor wax: add 10% of kerosene.
9 Phosphating primer degreasing agent: washing powder.
Wall construction paint latex paint cement coating window
LED Grow Lights 2000W, with 200pcs double chips led, 3pcs fast-speed cooling fans, we have double switch grow light/red+blue lighting/3500k white lighting, High power System Led Grow Light works very well for plant growth.2000W Grow Lights For Indoor Plants.
OEM:
Customzied box MOQ 500pcs.
Customzied logo MOQ 100pcs
2000W product photo:
Led Plant Lights,Cheap Grow Lights,Led Plant Grow Light,Led Grow Lamp
Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwygrow.com