Can winter decorate? Of course it did. In many people's impressions, winter is not suitable for decoration. Indeed, the cold temperatures in winter affect the renovation. But sometimes plans don't catch up with changes, such as parents getting married after years of command, etc. Anyway, there are some reasons why you must have winter decoration. What can be done? Do not worry, Xiao Bian, "worried about the owners of the first worry," finishing the winter decoration Raiders, teach you how to deal with the problems in the winter decoration.
Raiders (a) - winter decoration quality problem solution
Tile shedding
Winter tiles and tiles must be treated with water before paving, and must be saturated with moisture. Only in this way, the phenomenon of hollowing and falling off will not occur due to the weak adhesion between cement and cement due to the suction water. In addition, no matter whether it is a wall tile or a floor tile, it must be transferred from the outdoor to the interior for 24 hours. Only when it is adapted to the indoor temperature can it be paved, so as to avoid emptying or falling off after construction.
Veneer cracking
After the decoration panel is transported to the construction site, a dry towel is used to wipe off the floating dust, and the varnish cover is continuously brushed twice. All the decorative panels should be laid flat, with a large core board on the bottom and a large core board on the top, which cannot stand upright. This will prevent the panel from cracking and warping.
Wall cracking
Putty does not dry on the brush coating, the wall is easy to "sweat" or even a large area of ​​cracking, often open window ventilation, the time is best to choose between 10 am to 4 pm. The relatively high temperature during this period of time can prevent new batches of putty from freezing. After the putty was completely dry the first time, it was re-approved for the second time. After the second putty is completely dry, sand it carefully.
Cracked plaster line
When the gypsum board ceiling operation is performed, the moisture content of the wood keel must be controlled below 12%, and the keel must be firm, and no loosening phenomenon can occur, so that cracks on the gypsum board ceiling can be prevented. Between the gypsum board and the joint between the gypsum board and the wall, leave a gap of about 0.5 cm. Use gypsum powder and latex to reconcile the joints. Then double stick the kraft paper and scrape the putty to prevent the plaster line. Cracking.
Poor finish
In the event of strong winds and cool weather, it is not appropriate to carry out oil work. Because the winter wind and sand are relatively large and dust and paint are apt to adhere when the paint and paint are dry, care should be taken to select a windless weather for painting to ensure that the ambient temperature of the paint application is not lower than At 5 degrees Celsius, the ambient temperature when the varnish is applied is not less than 8 degrees Celsius and should be applied strictly according to the temperature in the product description. To prevent sand from falling on the paint surface, close the doors and windows.
Improper sewing
In the winter decoration, the seams of the doors and windows should not be too small, so as to avoid tight heat and tightness in the summer. When paving solid wood flooring, about 2mm of expansion joints should be left around. When furniture is made, about 0.1mm of interface seams must be left. The floor and wall joints should be bridged with floor layers and can be well handled. The disadvantages of excessive wall and floor gaps.
Ceilings with wooden keel structure may crack
The moisture content of the wood keel must be controlled below 12%. For cracks that occur due to different material cold shrinkage factors, the construction staff should take precautions to prevent joints. All wood products have joints controlled at 1 mm. The joints of boards and cement boards are controlled at 8mm. Therefore, when constructing, ceilings with wooden keel structures should be avoided as much as possible, and light steel keel ceilings are preferred.
Decoration Raiders
Wire Spring,Irregular Springs,Customized Irregular Springs,Customized Wire Spring
Dongguan Jiufukai Hardware Products Co., Ltd , https://www.jfkspring.com