The aluminum buckle board is a new type of decorative material that has emerged in recent years. It is light, water resistant, dust-free, anti-corrosion, easy to scrub, easy to install, strong three-dimensional impression, soft colors and elegant appearance, and is welcomed by users. . Aluminum gussets are particularly suitable for ceiling decoration in kitchens and bathrooms. However, the gusset plate and its associated frame are formed by pressing from a metal sheet or plastic. The connection form of the aluminum gusset plate is a insert type. In order to ensure that the connection is not loose, the size of the connection structure should be relatively accurate, allowing adjustment Smaller range, higher installation requirements. If the flat roof structure is not flat or the structure is deformed or the aluminum buckle plate is deformed, hard insertion or the like during the installation may cause flatness and unevenness of the aluminum buckle plate.
In order to avoid the uneven appearance of the aluminum buckle plate flat top, attention should be paid to the following points in the decoration construction process:
(1) The purchased aluminum buckle plate and its associated frames and fittings shall meet the product quality requirements and shall not be bent and deformed.
(2) During the transportation and stacking process, the aluminum pinch plate should be laid flat and cannot be pressed, and high temperature and harmful substances should be avoided.
(3) The installation of the frame is smooth and the spacing deviation should be controlled within the allowable range.
(4) When installing the aluminum buckle plate, if there is a deviation in the dimensions, the adjustment shall be made before inserting in order, and no hard insertion shall be made to prevent deformation.
(5) Large lighting fixtures, exhaust fans, etc. shall be provided with separate lifting devices. They shall not be placed directly on the flat top of the aluminum buckle plate. Reinforcement shall be carried out at the place where the lamps are installed.
As long as you can pay attention to the above five points, you can basically achieve the decorative effect of the aluminum buckle plate flat top, and avoid unevenness. During the construction process, if necessary, observation and inspection may be performed by means of a ruler, hand test, etc.
Construction Acceptance Lamp Brand Aisle Ceiling Decor Toilet Ceiling Material Toilet Ceiling Bathroom Exhaust Fan Bathroom Size
Exhaust Valve,Exhaust Cutout Valve,Exhaust Valve Control,Egr Valves
LIANGGONG VALVE GROUP CO.,LTD , https://www.lgvalvegroup.com