In sanitary ware products, many products are made of stainless steel, and how to maintain stainless steel ware ? Go Jiaju.com tells you that in the actual use process, it should be improved from the cleaning method, timely and effective. Clean the stainless steel products in order to make it more perfect. The most widely used stainless steel products in life are the faucets and sinks. Let's take a look at how they should be cleaned.
Stainless steel sanitary ware - maintenance of the faucet:
1. Before installing the faucet, you need to drain the water, wash the dirt in the water pipe, remove the debris in the installation hole, install the faucet as much as possible after the completion of the painting project. If it is not used for a long time after installation, it is best to clean the faucet. The cloth is covered.
2. The faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface to avoid damage to the surface sand.
3. Switch the faucet not too hard, just turn it gently, especially if the handle is not supported or used as a handrail.
4. The faucet should be wiped regularly to prevent the watermark from leaving after the water droplets dry.
5. The shower head metal hose of the bathtub faucet should be kept in a natural stretch state. Do not coil it on the faucet when not in use. At the same time, when using or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.
6. When the amount of water becomes smaller after using for a while, please pay attention to cleaning the filter.
7. The stainless steel faucet is mainly sanding. The sanding surface can be sanded with scouring pad. This is not the same as ordinary copper faucet. Even if the faucet is scratched, it can be repaired with scouring cloth. If there are rust spots on the surface of the faucet for other reasons, it can also be repaired by the same method.
8. Stainless steel faucet cleaning tips, squeeze a little toothpaste on the stainless steel faucet, then gently brush with a toothbrush, rinse with water, use an old stockings that are not needed to light, and then use orange peel on the metal surface Once again (because the orange peel contains fruit acid to maintain the stainless steel jewelry), it will make it bright and new.
Stainless steel sanitary ware - maintenance of the sink:
1) Deal with stains, wash them with mild detergent from time to time and rinse them off with water. Be careful not to scrub the sink with steel wire, scouring pad or abrasive material, which will damage the sink.
2) Do not accumulate water for a long time. If there is poor drainage, it should be repaired as soon as possible.
3) Try to avoid dumping chemicals in the sink. If it is accidentally dropped, it should be rinsed off with water in time.
4) Do not place low carbon steel or cast iron utensils in the sink for a long time.
After reading the above introduction, I believe that everyone has now understood how to maintain stainless steel sanitary ware, more relevant information, so stay tuned for the tracking report of Xiaojiaju.com.
Fc 207 Bearing description
Fc 207 Bearing,the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations. Pressed steel pillow block bearings are also available for light-duty applications.
Fc 207 Bearing specification|
Products Name |
High Quality Pillow Fc 207 Bearing |
|
Brand Name |
FCS,NSK,NTN,NACHI,Koyo |
|
Material |
Stainless steel.Gcr15.carbon steel |
|
Sealing |
Open, Z, ZZ, RZ,2RZ,RS, 2RS |
|
Quality Standard |
ISO9001 |
|
Service |
OEM service |
|
Delivery Date |
Within1-3 days after payments |
|
Payment terms |
A: 30% T/T in advance .70% against copy of B/L E:Money Gram |
|
Applications |
Auto, tractor ,machine tool, electric machine, water pump, agricultural machinery and textile machinery |
|
steel Ball Bearing |
1.plastic bag +box+carton 2.according to your requirements |
|
Special Properties |
1. High precision |
Fc 207 Bearing Type:UCT, UCF, UCFC, UCFL,UCP,UCP,UCP.UCFL.UCPA.UCLP.UCPW.UCPX.UCFS.SAFT series are avaIlable
Fc 207 Bearing size chart
| MODEL NO. | LENGTH(MM) | WIDTH(MM) | HEIGHT(MM) | WEIGHT(KG) |
| UCFC201 | 90 | 90 | 19 | 0.64 |
| UCFC202 | 90 | 90 | 19 | 0.6 |
| UCFC203 | 90 | 90 | 19 | 0.58 |
| UCFC204 | 100 | 100 | 20.5 | 0.75 |
| UCFC205 | 115 | 115 | 21 | 1 |
| UCFC206 | 125 | 125 | 23 | 1.3 |
| UCFC207 | 135 | 135 | 26 | 1.75 |
| UCFC208 | 145 | 145 | 26 | 2 |
| UCFC209 | 160 | 160 | 26 | 2.5 |
| UCFC210 | 165 | 165 | 28 | 2.95 |
| UCFC211 | 185 | 185 | 30 | 4 |
| UCFC212 | 195 | 195 | 35 | 4.9 |
| UCFC213 | 205 | 205 | 36 | 5.35 |
| UCFC214 | 215 | 215 | 38 | 6.9 |
| UCFC215 | 220 | 220 | 39 | 7.5 |
| UCFC216 | 240 | 240 | 42 | 8.7 |
| UCFC217 | 250 | 250 | 45 | 10.3 |
| UCFC218 | 265 | 265 | 50 | 13.5 |
Ucfc Pillow Block Bearing,Pillow Fc Bearing,Ucfc Flanged Ball Bearing,Fc Pillow Block Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com