When referring to the renovation of kitchen and bathroom, it is impossible not to mention the construction of ceilings. Due to the influence of kitchen fumes and the moisture in toilets and odors, ceiling construction has always been a difficult and important point in home improvement construction. Unlike ceilings in the living room and bedroom, which are mainly responsible for decorative effects, ceilings in kitchen and bathroom spaces are generally functional. In addition to choosing the right materials and the correct construction process during the renovation process, attention should also be paid to the details during the inspection, so as to reduce the trouble for the future.
In general, kitchen and bathroom ceiling should first pay attention to "three defenses", that is, waterproof, moisture and fire prevention, so the selection of materials, wood keel is not advocated. Currently used in home improvement is aluminum buckle plate, which can basically overcome some of the defects of the old generation of PVC plate, such as long time, easy to change color, aging and damage, while sticky greasy material is difficult to clean. There are also aluminum-plastic panels on the market. Although this material is only one word away from the aluminum gussets, the practical effect is quite different, because in the process of installing aluminum-plastic composite panels, wood-based panels are generally used to support the bottom. This practice is very unwise. If the moisture treatment is not good, the consequences will be unthinkable, so it is not recommended.
Decoration points
First install pipe and then do ceiling
According to the correct order of the ceiling of the aluminum buckle plate to reduce vibration, the correct installation sequence in the bathroom, first installed Yuba, exhaust fans, and then do aluminum buckle ceiling. Do not install the exhaust fan or bathroom heater directly on the aluminum gusset plate with screws. Use expansion bolts to hang directly on the top; if the exhaust fan exhaust hose is longer (more than 1 meter), it is best to have workers fix it on the top. , Otherwise, the exhaust pipe will vibrate when the exhaust fan is turned on. In the kitchen ceiling installation of the aluminum buckle plate, the hose and the flue of the hood need to be fixed firstly, and the other end must choose the location where the range hood needs to be installed, and then the ceiling of the aluminum buckle plate, it is better not to install the large lamp directly on the ceiling. .
The gussets should be seamless with the corners
When installing the keel, the direction of the keel should be determined according to the design trend of the construction drawing of the aluminum buckle plate. After confirming, the keel distance line and punching point should be marked on the roof, and the electric hammer should be used for drilling. The depth of drilling should not exceed 4 cm. In order to prevent the destruction of pre-embedded wire tubes inside the wall. After the punch is ready, expand the matching inner bulge into the hole. According to the height of the corners, the galvanized copper wire saw is good, into the inner bulge, according to the length of the room to cut the keel, the keel is fixed on the copper wire with a nut. The laying of aluminum buckle plate should also be based on the measurement of construction drawings, the buckle plate, the color lined up in order, row plate, the buckle plate should be seamless with the corners, and to indicate the control line hole.
Art setting manhole for easy maintenance
Many people in the home decoration kitchen and bathroom ceiling generally do not set inspection holes, that affect the appearance, do not know once the ceiling line equipment failure can not check to determine what parts, what is the reason, but can not be repaired, so for the laying pipe ceiling It is better to set up the manholes, select the areas that are more easily concealed and easily inspected, and artistically treat the manholes, for example, in combination with lamps or decorative objects.
Buy parts attention check to prevent deformation
When the kitchen ceiling is suspended, the purchased aluminum buckle plate and the supporting keel and accessories shall meet the quality requirements of the product and must be inspected for bending deformation.
During the transportation and stacking process, the gusset plate should be laid flat and cannot be pressed, and high temperature and harmful substances should be avoided. When the keel is installed, it must be flat and the spacing deviation should be controlled within the allowable range. When the aluminum buckle plate is installed, if there are deviations in the dimensions, adjustment shall be made before inserting in order, and no hard insertion shall be made to prevent deformation.
Do not drill too deep
In addition, it is worth reminding that the key to kitchen and bathroom ceilings is to control the measurement during the construction process, that is, when drilling fixed holes, do not drill too deep. In the past construction, there was such a case. Because the drilling is too deep, the original waterproof capacity may be damaged, resulting in endless troubles. Therefore, it is recommended to keep 3-4 centimeters in diameter when drilling.
Bathroom ceiling installation Home improvement decoration Interior decoration Range hoods Home decoration Decoration Living room Kitchen ceiling Kitchen bathroom Ceiling Bathroom ceiling material Bathroom size Bathroom ceiling Bathroom design Bathroom waterproof Bedroom lamp Bedroom lighting
Aluminum Alloy Handle,Aluminum Alloy Door Handle,Hardware Wire Drawing Handle,Interior Door Handle
Guangzhou Junpai Hardware Co., Ltd , https://www.junpaihardware.com